Sway bar measurements

[pink aar]

I need the measurement for my rear sway bar location. This being my first mopar, I screwed up. I had to do some frame repair (RUST) on both sides, so I welded up the holds for the sway bar not knowing better. Not knowing MOPARS.. I was hoping someone came tell me the inches I need. Thanks for the help .  I'm posting some picture of the measurement I need. Thanks again for the help.

[pink aar]

I'm sorry I should have made it a little more clear . Center of bolt head to center of bolt head

[Cuda Cody]

I can get those for you next time I have a T/A on the lift.  How soon do you need them?

[pink aar]

Cody, I was hoping soon. I want to undercoat the wheel wells this weekend, but I can wait. It's nothing but time and I have a lot of it.

[Cuda Cody]

I tried to get the measurement without the car on a lift or having to take the wheel off.  I could only get a partial photo of one side.  Looks like 9" on the passenger side.  I have a lot of friends cars in the shop right now and can't get to my lift anytime soon.