Andy's 'cuda

[MEK-Dangerous]

I'll gladly contribute to any fund to make this happen.

Andy was quite a guy. Carlisle 2013 we had that Friday night in Viperman land that will be one of my most memorable ever. I never laughed so hard. There was just a few of us, but we are bonded together for life now.   

[Dmz73]

Thanks!!
I was trying like hell to post that photo, but for some reason it would t work on my mobile.
I'll call Viperman tonight and see what we can do to time this up!

Dan

[Dmz73]

Thanks!!
I was trying like hell to post that photo, but for some reason it would t work on my mobile.
I'll call Viperman tonight and see what we can do to time this up!

Dan

Alright guys-
I just got off the phone with Cathy.
She's very excited to get this car going!
She'll be sending me some pics, and I'll try to swing out there and get a list together.

Dan


Sent from my iPhone using Tapatalk

[blown motor]

 

[HP_Cuda]

Hot dang, lets make this happen!

[Chryco Psycho]

get a comprehensive list of the parts she has , parts needed  & rough time line needed to finish it .
Maybe we can figure out approx cost for needed parts .
 

[Dmz73]

get a comprehensive list of the parts she has , parts needed  & rough time line needed to finish it .
Maybe we can figure out approx cost for needed parts .
 

Here are some pics straight from Cathy.
I'm having her search the house for parts that might be hanging around.
I'm getting a good list cooking based on what I see.




Sent from my iPhone using Tapatalk

[Chryco Psycho]

too bad no one painted the oil pump !!
Cool  at least we are getting an idea what is needed

[blown motor]

Thanks for your efforts Dan. 

[jimynick]

Thanks for your efforts Dan. 

  X2! Keep up the good work there handsome! 

[Chryco Psycho]

Any updates ?
we need to get a list together & get the funds together ASAP

[Dmz73]

Funny you should ask Neil!
I just got the photo inventory from Cathy, a few things notwithstanding.
Looks like there are quite a few pieces to the puzzle that are missing.

So, I've got some pics from Cathy, and I've generated a list based on what I have from Cathy's inventory.

Dave (Spikedog08) and I will go out and do some inventory. I plan to go this weekend.
Below is a list of parts that we think we need for the build!


Thermostat (built 440)- unconfirmed
Thermostat housing(440)-check!
NEED:Radiator hose (440)
NEED: Hard fuel line from pump to carb (440)
fuel line (soft)-check!
MAY NEED:Air cleaner (4barrel)
MAY NEED: Air cleaner element
Lokar kickdown linkage- check!
Stainless lockdown springs- check

NEED: Vacuum line hose from brakes to intake-
Radiator 3 row champion pro series cc375- check
NEED: Radiator hose from firewall to engine
Engine bay harness (from firewall to headlights)-unconfirmed
Forward light harness- check!
NEED: 3speed wiper motor harness-
Ballast resistor-check!
Radio antenna- check!
Radio antenna cable- check!
Electronic brake controller- check!
Brake light harness- (could be reverse lock out harness) check!
Fusible link-unconfirmed
Starter solenoid-unconfirmed
Water valve-unconfirmed
Power steering pump-check!
PS pump pulley- unknown
Mechanical water pump 7 blade fan- check!
Coolant overflow bottle- check!
Overflow bottle bracket-unconfirmed
Emissions charcoal vapor canister assembly-check
Lokar transmission dipstick tube-check
Dipstick tube- check!
Hood latch assy- check
Headlights- check!
Cuda Grille- check!

Brake ballast/check valve- check!
Spare brake hose- check!
Battery - unconfirmed
Speedo cable-check!
Electronic ignition module-(multiple)-check!
Electronic coil -check!


Serpentine belt kit parts
Crank pulley M P/N53010222
(Any 92-98 magnum)
PS pump (ZF MFG) M P/N 52088139AC
Rock auto P/N 2725 or 36717111
(96-98 ZJ w magnum v8)
(may have, pls confirm)
PS pulley M P/N varies
Rock Auto P/N 300306
Any 96-98 ZJ w magnum v8
WP pulley M P/N 53010221 any magnum from 98 previous
Idler pulley M P/N 53009508
Rock auto P/N 45016
(92-03 magnum engines)
Idler pulley bushings
M P/N 33002201
(92-03 magnum engines)
Tensioner (GM 88909608)
Rock auto 49214/38110
Early 90s 5.0 L Chevy
Alternator w/serpentine groove pulley-check !


Looking for the headlight buckets
Looking for the Grille hardware

Spare Gas shocks -
Spare exterior mirror
Spare wore harness
Spare HvAC fan motor- check!
May be spare Front brake brackets- check!
May be spare Front brake calipers-check!
May be spare Front brake dust shields- check!

If you want to send parts- awesome!
Pm me, and I'll set you up with an address
If you want to send money, pm me and we can work it out. Cathy does not yet have a PayPal account, but I do!

You can make A check payable to Cathy Knox
Cathy's address:
19600 W Old US Hwy 12,  Chelsea ,  Mi  48118

Again,
Thanks to all who are willing to pitch in!

Regards,
Dan Zimmermann



Sent from my iPhone using Tapatalk

[BIGSHCLUNK]

I sent Dan this link earlier , but I figured I'd share it here. I'm thinkin' we need build party Part II

https://www.flickr.com/photos/99649212@N06/albums/72157645214455544

[JS29]

What size radiator, I have A 26" upper hose I can donate.

[blown motor]

I love the pictures of Ian laying under the car with a big cigar in his mouth!

Do we have a possible build date? Can we finish it in time for Carlisle?