Main Menu

Post a picture of your Mopar Engine

Started by Topcat, November 23, 2018, 06:01:09 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

nsmall

 :iagree: Zuke, looks like a 14x2, it's worth trying the top mentioned above,  I'm willing to guess you will notice a difference.

Just went through this, my 14x2 cleaner was a dog vs a 14x3 which probably won't fit??? so buy the top that breaths and give it a try.   :bradsthumb:

HP_Cuda


You mean like this?

1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200

THE ZUKE

Quote from: nsmall on December 02, 2018, 10:16:36 PM
:iagree: Zuke, looks like a 14x2, it's worth trying the top mentioned above,  I'm willing to guess you will notice a difference.

Just went through this, my 14x2 cleaner was a dog vs a 14x3 which probably won't fit??? so buy the top that breaths and give it a try.   :bradsthumb:


Yes, but I'm not sure if it will be higher than the hood  :(



HP_Cuda


Yup you are correct!
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200




Joegrapes

1970 440 with the usual, cam, aluminum heads, pistons, roller rockers, headers and fuel injection.

bennydodge

#68
Numbers matching 1973 340, stroked and poked to 416 cubes, comp XR286r solid roller, edelbrock heads, TTI headers and exhaust, Air Gap RPM intake, MP 4" stroke cast crank, Eagle H-beam rods, Ross aluminum forged pistons (11.25 to 1 comp.), Crane ductile iron 1.6 ratio rockers, stock ECU. This pic was taken with a 750 street demon carb (TQ remake).
1973 Challenger 340
2015 Challenger R/T classic B5, wife's car
2010 Dodge 3500 dually
2016 Hellcat Challenger Redline Red A8

YellowThumper

Long road getting closer.
Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.



76orangewagon

Here are a couple more..one from my 69' Road Runner and the other from my 76' Power Wagon (obviously)

Topcat

Almost 3 weeks gone by....

Did we run out of engines? 

timdp

340 six pack built mid-1980s. Hood supports cut to fit under a flat hood.


Topcat

Quote from: timdp on December 23, 2018, 12:31:29 PM
340 six pack built mid-1980s. Hood supports cut to fit under a flat hood.



It looks like the fan is on backwards?   :notsure: