Main Menu

Ebody 4 speed parts wanted

Started by Todd489, November 14, 2017, 07:31:40 AM

Previous topic Next topic

0 Members and 3 Guests are viewing this topic.

Todd489

Looking for 4 speed parts for 70 challenger 383, I'm converting over to manual , I know it's a shot in the dark, but never know, I am getting a trans from passon though,  what ever else is out there let me know.

soundcontrol

Check e-bay also, I just found a restored pistol grip shifter with all the connecting rods. From this guy, he seems to have a lot of 4-speed stuff. Good guy to deal with.
https://www.ebay.com/sch/rwr1966/m.html?_nkw=&_armrs=1&_ipg=&_from=

And I found all the pedals and support earlier, just missing the bellhousing and the flywheel and clutch now.

anlauto

Brewers will have everything you need :bradsthumb:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


fantum

Don't forget the bracket that sits on the frame rail and supports the end of the rotational bar that depresses the clutch when you step on the clutch pedal.

ply64post

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff          :wrenching:

anlauto

Quote from: ply64post on November 17, 2017, 10:08:06 AM
If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff          :wrenching:

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout.  :thinking:

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Jim AAR

Quote from: anlauto on November 17, 2017, 10:42:58 AM
Quote from: ply64post on November 17, 2017, 10:08:06 AM
If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff          :wrenching:

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout.  :thinking:

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.

https://www.ebay.com/itm/202014257969/?vectorid=229466&item=202014257969%2F&rmvSB=true

Here as well: https://www.jimsautoparts.com/transmission_parts.htm


anlauto

Quote from: Jim AAR on November 17, 2017, 10:54:44 AM
Quote from: anlauto on November 17, 2017, 10:42:58 AM
Quote from: ply64post on November 17, 2017, 10:08:06 AM
If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff          :wrenching:

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout.  :thinking:

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.

https://www.ebay.com/itm/202014257969/?vectorid=229466&item=202014257969%2F&rmvSB=true

Here as well: https://www.jimsautoparts.com/transmission_parts.htm

Thanks Jim  :drinkingbud:

The Ebay one looks like an original one restored which I might have to go with....Jim's Auto is most likely out of stock like everybody else, but I'll try sending an email.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

soundcontrol

Quote from: ply64post on November 17, 2017, 10:08:06 AM
If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff          :wrenching:

What is that, what s the function? Something I need on a modified -73?

anlauto

Quote from: soundcontrol on November 17, 2017, 12:34:41 PM
Quote from: ply64post on November 17, 2017, 10:08:06 AM
If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff          :wrenching:

What is that, what s the function? Something I need on a modified -73?

No...it's a 1970 only thing. In order to remove the key from the ignition the car has to be in reverse(4spd car) or park(auto car). In 1971 + the switched to a column lock with the "to remove key" lever.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Jim AAR

Quote from: anlauto on November 17, 2017, 12:31:47 PM
Quote from: Jim AAR on November 17, 2017, 10:54:44 AM
Quote from: anlauto on November 17, 2017, 10:42:58 AM
Quote from: ply64post on November 17, 2017, 10:08:06 AM
If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff          :wrenching:

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout.  :thinking:

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.

https://www.ebay.com/itm/202014257969/?vectorid=229466&item=202014257969%2F&rmvSB=true

Here as well: https://www.jimsautoparts.com/transmission_parts.htm

Thanks Jim  :drinkingbud:

The Ebay one looks like an original one restored which I might have to go with....Jim's Auto is most likely out of stock like everybody else, but I'll try sending an email.

No problem, I like the one on E-Bay as well, he did a nice job of restoring it. He says its all original parts except for the Bushings, Washers & Clips.

I was looking for the just the Rods (I have everything else) awhile back and came across the Jim`s Auto one, but I didn`t inquire if he had it in stock.

:)