I'm looking for the N95 covers for a 1970 Challenger. I have the narrow metal piece but missing the larger one. Anyone have one they want to sell?
Is it the same as the one piece 1971 E Body shield ?
I think I remember hearing that they are different for 1970 and 1971. The one I have is 2 pieces and I'm missing half of it. But I'll buy a complete set if someone has one. :yes:
Quote from: anlauto on January 23, 2017, 12:38:57 PM
Is it the same as the one piece 1971 E Body shield ?
Any chance this is the one you are looking for?
YES! :veryexcited: :veryexcited: :yes: :yes: :yes: :yes: :yes: :please: :yes: :yes: :yes: :yes: :yes: :veryexcited: :veryexcited:
Do you have a use for it or is it an extra part you might sell? :takemymoney:
Quote from: 71GranCoupe on January 23, 2017, 01:02:21 PM
Any chance this is the one you are looking for?
Do you know if it will fit an E-Body? I don't know much about them. :notsure: Looks pretty close to the one in the photo.
Quote from: 71GranCoupe on January 23, 2017, 01:02:21 PM
Any chance this is the one you are looking for?
Those are readily available in reproduction and I believe they make ones with tabs on them for 70 as well :thinking:
You serious? :clapping: Who's making them?
Quote from: anlauto on January 23, 2017, 01:28:58 PM
Those are readily available in reproduction and I believe they make ones with tabs on them for 70 as well :thinking:
A wise man once said, (Alan) :ebay: ebay is your friend.
http://www.ebay.com/itm/1970-CUDA-BARRACUDA-CHALLENGER-CALIFORNIA-EMISSION-GAS-TANK-VAPOR-LINES-SHIELD-/251946027616?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=GabFoHIPkkg15oB0WJaAc1ez6bE%253D&orig_cvip=true&rt=nc
Cody, are you looking for a Cuda or Challenger? After typing this, I would suspect they are the same, but one is always made out to be an ass when they assume something, right. :bricks: :cheers:
PS. That sure looks like mine, but it is packed in a box and only if I knew which one. :thinking:
That's awesome! But the last one just sold in the last 24 hours. :crying: I'll keep an eye out to see if he lists more, if not I guess I'll just make one. :slapme5:
Quote from: 71GranCoupe on January 23, 2017, 01:51:51 PM
A wise man once said, (Alan) :ebay: ebay is your friend.
http://www.ebay.com/itm/1970-CUDA-BARRACUDA-CHALLENGER-CALIFORNIA-EMISSION-GAS-TANK-VAPOR-LINES-SHIELD-/251946027616?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=GabFoHIPkkg15oB0WJaAc1ez6bE%253D&orig_cvip=true&rt=nc
Challenger.... with my luck they'll be different.
Quote from: 71GranCoupe on January 23, 2017, 01:53:44 PM
Cody, are you looking for a Cuda or Challenger? After typing this, I would suspect they are the same, but one is always made out to be an ass when they assume something, right. :bricks: :cheers:
Quote from: Cuda Cody on January 23, 2017, 01:54:56 PM
That's awesome! But the last one just sold in the last 24 hours. :crying: I'll keep an eye out to see if he lists more, if not I guess I'll just make one. :slapme5:
Quote from: 71GranCoupe on January 23, 2017, 01:51:51 PM
A wise man once said, (Alan) :ebay: ebay is your friend.
http://www.ebay.com/itm/1970-CUDA-BARRACUDA-CHALLENGER-CALIFORNIA-EMISSION-GAS-TANK-VAPOR-LINES-SHIELD-/251946027616?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=GabFoHIPkkg15oB0WJaAc1ez6bE%253D&orig_cvip=true&rt=nc
I have picked up a few things from Jim, and he will relist. Just send him a message and I bet it will happen asap. I will probably buy one, like I said, mine is rusty and crusty. And for $35 to the door is hard to beat. :ohyeah:
Good idea. Just sent him an email. :handshake:
I messaged him and he was fast to reply! I'll get one ordered. Thanks guys for the help!!!!! :clapping:
Quote from: Cuda Cody on January 23, 2017, 10:18:22 PM
I messaged him and he was fast to reply! I'll get one ordered. Thanks guys for the help!!!!! :clapping:
He sells on moparts alot too. Whoops, can we say that here?? :unitedstates:
Yes, you can talk about Moparts all you want. We're all one big Mopar family! :)
Maybe we can get him to offer some of his e-body items here too! :smile:
Quote from: 71GranCoupe on January 23, 2017, 10:56:43 PM
Quote from: Cuda Cody on January 23, 2017, 10:18:22 PM
I messaged him and he was fast to reply! I'll get one ordered. Thanks guys for the help!!!!! :clapping:
He sells on moparts alot too. Whoops, can we say that here?? :unitedstates:
"Maybe we can get him to offer some of his e-body items here too! :smile: "
Hi Cody, I never knew about this site, very nice !! :bigthumb:
I would have no problem posting the parts I make on your site. I sell cutting tools to industry and machine shops and one of my friends/ customer makes my parts right here in the US of A and has for years. Everything is made to the original factory spec using original parts.
I currently have :
-both 1970 California emission and 1971-4 fuel line shields.
-both 1970 (2pc welded) and 1971(1pc) correct roadlamp brackets with the correct "R" & "L" for 1970, and "RH" & "LH" 1971 stamped in each.
-1970-1 galvanized side marker backing plates with the correct die # stamped in each
-hemi / max wedge distributor hold down clamps
-hemi,440-6,340 shaker feet...both hemi and 6-pack are correctly rubber dipped lower portion as done by the factory
-correct shaker base plate to adaptor ring steel diamond washers with slight top edge chamfer exact to factory.
-1970-4 Challenger R/T hood block-off plates.
Anyone can feel free to contact me @ BAKURRUDA@AOL.COM
Thanks
Jim
:cheers:
Allen, I was on the edge of registering, but when I saw you were a member, I knew this was going to be a stand-up,quality site, just light the works of art that roll out of your garage :canada: and into the hands of your customers and wanted to be part of the greatness !!
:ohyeah:
Quote from: JEJJ on January 24, 2017, 01:04:16 PM
Allen, I was on the edge of registering, but when I saw you were a member, I knew this was going to be a stand-up,quality site, just light the works of art that roll out of your garage :canada: and into the hands of your customers and wanted to be part of the greatness !!
:ohyeah:
Stop kissing up and send me the parts I bought off of you.... :steamingmad: :rofl:
Glad to see Jim found his way here. :welcome: For the record, I have bought parts from Jim and have been extremely happy with every transaction. :yes:
"Glad to see Jim found his way here. :welcome: For the record, I have bought parts from Jim and have been extremely happy with every transaction. :yes:
"
Thank you for the kind words :cheers: and love this site!! :bigthumb:
Glad it worked out for you Cody! This is why it is so important to have a active and informative forum/community and I strongly believe that is what you have created here. :bradsthumb:
Is there another sheet metal part that shields this assembly? I ask because mine has the N95 stuff but has this extra sheet metal part hanging from the wheel tub. It's fastened with 2 bolts/screws and the other end has a hole to fasten somewhere but I don't know where? Right now it's flopping around on the wheel tub.....
Do you have a photo? I think they changed design from year to year? :notsure:
Quote from: Brads70 on April 07, 2017, 03:02:49 PM
Is there another sheet metal part that shields this assembly? I ask because mine has the N95 stuff but has this extra sheet metal part hanging from the wheel tub. It's fastened with 2 bolts/screws and the other end has a hole to fasten somewhere but I don't know where? Right now it's flopping around on the wheel tub.....
Quote from: Cuda Cody on April 09, 2017, 10:30:22 AM
Do you have a photo? I think they changed design from year to year? :notsure:
Quote from: Brads70 on April 07, 2017, 03:02:49 PM
Is there another sheet metal part that shields this assembly? I ask because mine has the N95 stuff but has this extra sheet metal part hanging from the wheel tub. It's fastened with 2 bolts/screws and the other end has a hole to fasten somewhere but I don't know where? Right now it's flopping around on the wheel tub.....
It's almost like a mudflap, except it flops around as it's only fastened at the top?
Yes, I think you're missing the other side. That hole should have a screw holding it up and connecting it to the 2nd piece that goes through that rail.... right?
@JEJJ (https://forum.e-bodies.org/mlist/jejj_169) should know.
Not my photos, but it's a perfect shot of what the 2nd part looks like. I think I got that photo from someone on here.
So it flips up and screws into the floor? Frame rail? :notsure: