Main Menu

74 cuda tranny cross-member

Started by Cuda70-74, July 08, 2020, 12:59:51 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

Cuda70-74

As the title says look for a 4 speed  tranny cross-member mount or trade for the one I got which doesn't fit my car. Im also looking for a driveshaft. I'll be at carlise on Saturday
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

anlauto

They are the same for automatic or standard transmission cars. The one you have is a 70-71 which is harder to find then the 73-74's Only the hole spacing is different.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Cuda70-74

Quote from: anlauto on July 08, 2020, 01:54:34 PM
They are the same for automatic or standard transmission cars. The one you have is a 70-71 which is harder to find then the 73-74's Only the hole spacing is different.
Oh I didnt know that. Should I just drill out the hole and use it then??
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger


anlauto

Been awhile since I played with the 2-3-4 stuff, but I believe the center two holes line up, but the outer two holes don't. There's a chance you could make it work. :bigthumb:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Cuda70-74

Quote from: anlauto on July 08, 2020, 02:22:05 PM
Been awhile since I played with the 2-3-4 stuff, but I believe the center two holes line up, but the outer two holes don't. There's a chance you could make it work. :bigthumb:
I can drill out the outer 2 holes and make it work.
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration