Main Menu
avatar_dodj

Mopar clutch?

Started by dodj, August 29, 2020, 08:27:15 AM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages1
User actions

dodj

August 29, 2020, 08:27:15 AM
Was in the trunk of a parted out challenger.
It's 10.5"
B&B three finger pressure plate with it.
Is it a mopar clutch?
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

Brads70

#1
August 29, 2020, 08:33:47 AM
How many splines? 23, 26 etc...? Has more than 18 for sure?    1 1/8" -26 spline  is GM

dodj

#2
August 30, 2020, 05:33:39 AM
23 spline. Bore measures about an inch dia.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

Brads70

#3
August 30, 2020, 06:09:14 AM
Quote from: dodj on August 30, 2020, 05:33:39 AM
23 spline. Bore measures about an inch dia.


Looks like it might be then?
http://www.brewersperformance.com/products.php?cat=261

Chryco Psycho

#4
August 30, 2020, 02:57:58 PM
I agree it probably i s a Mopar clutch but at only 10.5" I would not use it in a high HP application , I only use 10.95"/11"or better yet twin disc  for that

dodj

#5
August 30, 2020, 05:59:13 PM
Quote from: Chryco Psycho on August 30, 2020, 02:57:58 PM
I agree it probably i s a Mopar clutch but at only 10.5" I would not use it in a high HP application , I only use 10.95"/11"or better yet twin disc  for that
I'm  just going to sell it.

Twin disc's?
Are there people out there with multiple disc clutches in street cars?
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

RUNCHARGER

#6
August 30, 2020, 07:23:02 PM
Guilty! Best way to fly with a decent engine.
Sheldon

dodj

#7
August 30, 2020, 07:37:24 PM
Quote from: RUNCHARGER on August 30, 2020, 07:23:02 PM
Guilty! Best way to fly with a decent engine.
Huh.
I thought they were pretty much race only pieces.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

anlauto

#8
August 30, 2020, 07:41:29 PM
I think it's a little over kill for the street, but they're becoming more common for sure...I see a lot advertised...

I removed one from a customer's V code Cuda and replaced it with the traditional 3 finger B & B style.....no complaints  :dunno:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

RUNCHARGER

#9
August 30, 2020, 09:22:50 PM
This 572 has been apart about 5 times (Indy build) in the last 4 years but the Street twin hasn't been touched, nor the Aluminum Dana 60 or the 1350 Driveshaft. The 18 spline was changed out too.
Sheldon

dodj

#10
August 31, 2020, 04:09:34 AM
Quote from: RUNCHARGER on August 30, 2020, 09:22:50 PM
This 572 has been apart about 5 times (Indy build) in the last 4 years
Sounds expensive..
That's the 'cuda engine?
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

Chryco Psycho

#11
August 31, 2020, 06:32:10 AM
Guilty also , I have a 512 beast with & B&B Long street twin & at least 2 of the other 512s I have built are running street twins , 2x the surface area & approx 1/3 less pressure
Print
Go Up Pages1
User actions
Tags:

Similar Topics