1970 E Body Stamping Question

[6bblgt]

What do you mean "#8 of 20 interiors"  Was there 20 different interior combinations ?

crazy 

black vinyl bucket H6X9 ~ 61.7%
white vinyl bucket w/black dash H6XW ~ 9.5%
green vinyl bucket H6F8 ~ 5.8%
blue vinyl bucket H6B5 ~ 5.5%
black vinyl bench H4X9 ~ 4.8%
black leather bucket PRX9 ~ 3.3%
red vinyl bucket H6E4 ~ 3.2%
tan vinyl bucket H6T5 ~ 2.2%
tan leather bucket PRT5 ~ 1.1%
white vinyl bench w/black dash H4XW ~ 0.9%
green vinyl bench H4F8 ~ 0.8%
blue vinyl bench H4B5 ~ 0.7%
white leather bucket w/black dash PRXW ~ 0.6%
white vinyl bucket w/blue dash H6BW ~ 0.4%
white vinyl bucket w/red dash H6EW ~ 0.2%
white vinyl bucket w/green dash H6FW ~ 0.2%
black vinyl w/houndstooth insert bucket P5X9 ~ 0.1%
white vinyl bench w/blue dash H4BW < 0.1%
white vinyl bench w/green dash H4FW < 0.1%
white leather bucket w/blue dash PRXW < 0.1%
white leather bucket w/red dash PRXW < 0.1%
white leather bucket w/green dash PRXW < 0.1%

the above 22 interiors add up to 101+% -  - ERROR based on adding ~20 rounded numbers

[6bblgt]

& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

[anlauto]

& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

That would be sweet if he was to restore it with those back on it.....few people in the world would. 

Is there any available vinyl trim that's similar ? 

[6bblgt]

Performance Car Graphics offers the pinstripes http://www.performancecargraphics.com/Stripes_Lettering/Barracuda/70_Mid_Pinstripe.htm

& I've seen a couple restored cars with the mouldings, there must be something "close' - there was a restored EB5 340 'cuda w/added SHAKER in CA that ended up at RK Motors that had the mouldings/stripes - I think I have pics 

[pbajeff]

I have been trying to find a pic of a full car with that to see what it looked like - but no luck so far.

If you have one I would like to see that.

And I am assuming those numbers you listed are for all 70 cudas, not just V code,  correct?

[750-h2]

What do you mean "#8 of 20 interiors"  Was there 20 different interior combinations ?

crazy 

black vinyl bucket H6X9 ~ 61.7%
white vinyl bucket w/black dash H6XW ~ 9.5%
green vinyl bucket H6F8 ~ 5.8%
blue vinyl bucket H6B5 ~ 5.5%
black vinyl bench H4X9 ~ 4.8%
black leather bucket PRX9 ~ 3.3%
red vinyl bucket H6E4 ~ 3.2%
tan vinyl bucket H6T5 ~ 2.2%
tan leather bucket PRT5 ~ 1.1%
white vinyl bench w/black dash H4XW ~ 0.9%
green vinyl bench H4F8 ~ 0.8%
blue vinyl bench H4B5 ~ 0.7%
white leather bucket w/black dash PRXW ~ 0.6%
white vinyl bucket w/blue dash H6BW ~ 0.4%
white vinyl bucket w/red dash H6EW ~ 0.2%
white vinyl bucket w/green dash H6FW ~ 0.2%
black vinyl w/houndstooth insert bucket P5X9 ~ 0.1%
white vinyl bench w/blue dash H4BW < 0.1%
white vinyl bench w/green dash H4FW < 0.1%
white leather bucket w/blue dash PRXW < 0.1%
white leather bucket w/red dash PRXW < 0.1%
white leather bucket w/green dash PRXW < 0.1%

the above 22 interiors add up to 101+% -  - ERROR based on adding ~20 rounded numbers
How about the coloured vinyl/cloth seats?

[anlauto]

I think Dan's list is only for 1970 Barracuda/Cuda ....and I'm not certain but I think you could only get black/white houndstooth 

[6bblgt]

And I am assuming those numbers you listed are for all 70 cudas, not just V code,  correct?

yes, the numbers are all '70 'cudas (BS23) ONLY

the only combinations that were tracked were: engine/transmission/axle

[6bblgt]

I think Dan's list is only for 1970 Barracuda/Cuda ....and I'm not certain but I think you could only get black/white houndstooth 

the list is 'cuda hardtop only (BS23)

the P5X9 black vinyl & cloth black/white houndstooth insert w/red piping (Gran Coupe) interior was added mid-year to the 'cuda, if the P5K4 burnt orange vinyl & cloth black/burnt orange insert (Gran Coupe) interior was also available in a 'cuda - it would fall into the < 0.1% category (<9 cars).

[cuda hunter]

& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

I really like those V5R mouldings.  I've been looking for a set to purchase forever.  Probably won't find a set, but I'm always looking. 

[challenger6pak]

& the V5R "protective body-side mouldings & pinstripes in RED" are probably the single RAREST OPTION on the OP's 440+6 'cuda

I really like those V5R mouldings.  I've been looking for a set to purchase forever.  Probably won't find a set, but I'm always looking.

Are the V5R mouldings the same as the inserts in the body protection mouldings?

[6bblgt]

I'd bet the insert from the Challenger V5_ moulding is too narrow ( @challenger6pak can you measure it?)

IIRC the '70 Barracuda moulding is ~1/2" + the pinstripes for ~1" wide
here's a piece of '71 Barracuda & others V5X it's ~5/8"

[challenger6pak]

The insert is around 5/8.

[xx88man]

I think Dan's list is only for 1970 Barracuda/Cuda ....and I'm not certain but I think you could only get black/white houndstooth 

I know this is an old thread but...how much different were the '70 Challengers? I had one that had a blue houndstooth interior. I assume the Barracudas didn't have that option?