70 Cuda door latch rods

[B5fourspeed]

Just got my door latches back from being restored.My doors were bare when I got the car.I attached the door handles,door locks and inside pulls.I need to know where each rod goes to on the door latch.Thanks

[jt4406]

Not sure you can use this, but....

[Jay Bee]

Here's some pictures I have.

[B5fourspeed]

Thank you for the pictures.

[B5fourspeed]

The rods that go from the door handle to the latch are hard to find.The door lock rods are reproduced.

[B5fourspeed]

Where does the rod for the inside pull go on the latch?Thanks

[Jay Bee]

It's the one in my last picture. The second last pic shows both, the inside pull and the inside lock lever mechanism which I sold.

[B5fourspeed]

Which rod in the picture Is the door lock or door pull

[Jay Bee]

In IMG_3367a the top rod is the door pull and the bottom rod is the door lock mechanism.

IMG_3514 shows the correct position of the door pull rod retaining clip.

[B5fourspeed]

Thank you for the help

[Claudia]

Here are a few additional pictures that may be helpful . . .

[Jay Bee]

Thank you for the help

You're welcome.
Here's one more showing the whole inner door pull (missing inner door lock mechanism). It's a higher resolution so you can download it and enlarge or zoom in on it.

John

[B5fourspeed]

What clip is used to secure the door pull rod to the latch.The hole on the latch for the in day inside door pull is a different size hole

[Jay Bee]

What clip is used to secure the door pull rod to the latch.The hole on the latch for the in day inside door pull is a different size hole

It's in this thread. Reply #11 talks about the metal clip, Reply #13 shows the metal clip
https://forum.e-bodies.org/interior/6/door-handle-to-latch-lever/16697/

[B5fourspeed]

I wonder where I can get that clip at.Thank you for the picture.