Main Menu

Cuda Cup Holder

Started by CudaHead, March 28, 2019, 02:03:35 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

CudaHead

I bought a cup holder from:
https://www.cupholdersplus.com/mopar-double-drink-holder.html


I thought it was too much so I cut it down and made this. I used Velcro to keep it in place on the console.

Rich G.

Great idea. I can't drive without my coffee!

ledphoot

For those of you without a center console or any place to place a cupholder I use a Zojirushi insulated coffee mug.. Keeps stuff very HOT and doesn't spill.. It's a step up from the Hydroflask I used to swear by :)

https://www.amazon.com/dp/B00HYOGUOA/ref=twister_B07B41GHPL?_encoding=UTF8&psc=1


Katfish

Quote from: CudaHead on March 28, 2019, 02:03:35 PM
I bought a cup holder from:
https://www.cupholdersplus.com/mopar-double-drink-holder.html


I thought it was too much so I cut it down and made this. I used Velcro to keep it in place on the console.
Does that sweat, I'd be worried about build up of water on the console.

7212Mopar

That is an expensive cup holder.
1973 Challenger Rallye, 416 AT
2012 Challenger SRT8 6 speed Yellow Jacket

CudaHead

I have just installed it, but I have not tried it yet. That is a good question that may have to be addressed. I'm trying to be non-invasive so that may be a problem.

CudaHead

This may be the answer to the drips at the bottom of the cup holder:
https://www.weathertech.com/weathertech-coasters/carcoasters/


CudaMoparRay

Innovative although expensive workaround to not destroying the center console
Will subscribe to see where this goes thanks

Katfish


anlauto

Do people actually drink a lot in their cars ? :dunno:
Back when I was doing a lot of car shows...I remember I had a "zero food or drink" rule in my cars...used to drive my girlfriend nuts.... :haha:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

GoodysGotaCuda

Quote from: anlauto on March 30, 2019, 07:38:41 PM
Do people actually drink a lot in their cars ? :dunno:
Back when I was doing a lot of car shows...I remember I had a "zero food or drink" rule in my cars...used to drive my girlfriend nuts.... :haha:

I sure do! My kid's car seats have built in cupholders for me. That said, at any given time I'm hauling milk if my son is with me.  :stop:

Carpet is cheap if something got out of hand! :burnout:
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs


anlauto

Quote from: GoodysGotaCuda on March 30, 2019, 07:41:17 PM
Quote from: anlauto on March 30, 2019, 07:38:41 PM
Do people actually drink a lot in their cars ? :dunno:
Back when I was doing a lot of car shows...I remember I had a "zero food or drink" rule in my cars...used to drive my girlfriend nuts.... :haha:

I sure do! My kid's car seats have built in cupholders for me. That said, at any given time I'm hauling milk if my son is with me.  :stop:

Carpet is cheap if something got out of hand! :burnout:

I guess with small kids you have to...Goldfish and sippy cups ! :twothumbsup:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

YellowThumper

Posted before. Dakota console squeezes between the seats.
Not mounted just pull out for shows.
Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.

CudaHead

I'm still working on this. It was interfering with the shifter so I changed it.
It is now much smaller and I used an existing screw location to hold it in place (with a longer screw).
Not perfect yet but getting better. I tighten down the screw as much as I could but it still wants to swivel on the screw. I added Velcro to keep it from moving. I'm thinking I need is add a rubber bottom so that it will not move.
Close, but not there yet.

HP_Cuda


This gives me a great idea.

Will have to give it a try. I really just need the cup and not the bridge in between the two.

Hmmm.
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200