Main Menu

Heater box question

Started by garrett007, September 05, 2018, 08:14:48 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

garrett007

I have installed the heater box (non AC) and defrost vent.  But there is a gap between the 2 parts.  What am I missing?  Is there a seal?  Both are original to the car.

Thanks,
70' Challenger - running

Bullitt-

Nothing missing....that's the way they came
.                                               [glow=black,42,300]Doin It Southern Syle[/glow]       

RUNCHARGER

Sheldon


Cuda Cody

@garrett007  yup, that's as good as it gets.  I've seen people seal that joint up and I guess that would help, but I really have never needed the defrost so I didn't do it to mine.

garrett007

Thanks for the input.  I just needed to be sure before I install my dash.
70' Challenger - running

anlauto

It's left open so it draws more cabin air in as the air flows upward towards the windshield.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

RUNCHARGER

They work fine, I've driven them in the winter.
Sheldon


HEMICUDA

Quote from: anlauto on September 06, 2018, 05:53:06 AM
It's left open so it draws more cabin air in as the air flows upward towards the windshield.

Curious, where did that come from?

Burdar

I've heard the same thing for years.  (The gap was to draw in some cabin air.)

HEMICUDA

Quote from: Burdar on September 07, 2018, 07:02:49 AM
I've heard the same thing for years.  (The gap was to draw in some cabin air.)

I never thought about it, since the cage fan is turning in a sealed box, air has to come from somewhere if the vent is closed.

anlauto

Quote from: HEMICUDA on September 07, 2018, 06:48:26 AM
Quote from: anlauto on September 06, 2018, 05:53:06 AM
It's left open so it draws more cabin air in as the air flows upward towards the windshield.

Curious, where did that come from?

Physics class.....maybe you were absent that day ? :dunno:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


Msbaugh440

Quote from: anlauto on September 07, 2018, 07:37:24 AM
Quote from: HEMICUDA on September 07, 2018, 06:48:26 AM
Quote from: anlauto on September 06, 2018, 05:53:06 AM
It's left open so it draws more cabin air in as the air flows upward towards the windshield.

Curious, where did that come from?

Physics class.....maybe you were absent that day ? :dunno:


floorit426

I must've been out behind industrial arts, that day...

HEMICUDA

Quote from: anlauto on September 07, 2018, 07:37:24 AM
Quote from: HEMICUDA on September 07, 2018, 06:48:26 AM
Quote from: anlauto on September 06, 2018, 05:53:06 AM
It's left open so it draws more cabin air in as the air flows upward towards the windshield.

Curious, where did that come from?

Physics class.....maybe you were absent that day ? :dunno:

I just don't remember learning that in any classes during my college days, :notsure: in either of my Electrical or Mechanical engineering degrees.  I wrote the specifications, designed and built the truck to carry the solid rocket engines for the space shuttle, I just can't figure the super technical stuff like you can Allan, you're my hero.  I feel like such a bumb a$$.

Rich G.

Don't feel bad, I call DMT and asked if anything goes there and they said nope but they get lots of calls asking!