Modern Bucket seat mod for 73 Cuda

[JunkYardFind]

What to you guys think about this "upgrade"?
The seats do not even need to be from a Mopar, just curious as to how hard it would be to put modern buckets in.
As my name suggests, I spend a fair amount of time in the local junkyards and can easily get a decent set on the cheap.
Has anyone here done this? If so, how was modification on the tracks for fitment.

[Brads70]

Welcome to the site! 

Lots of posts on here about this mod.
Here is one    https://forum.e-bodies.org/interior/6/modern-seats-in-e-body/6473/msg91173#msg91173

[torredcuda]

Currently working on installing Neon SRT seats in my `72. They take some work to get low enough for my liking but have great support and they are factory Mopar.
https://forum.e-bodies.org/your-restoration-project-roseville-moparts/10/fried-fish-rebiulding-and-upgrading-the-barracuda/16486/

[Cudajason]

Welcome to the site! 

Lots of posts on here about this mod.
Here is one    https://forum.e-bodies.org/interior/6/modern-seats-in-e-body/6473/msg91173#msg91173

and here!

https://forum.e-bodies.org/interior/6/more-hyundai-seats/19295/

[bcudachris]

FWD Shelby Charger seats will bolt right to e-body seat tracks.  They can be found.  The driving position is a couple of inches higher.

[JunkYardFind]

@Cuda jason

Thanks! Brads70 mentioned you may have more info on a seat that has a bolt on application... or at least close.
I have read through most of the posts and like the look of the Hyundai seats. I could probably pay someone to to fabricate those but am in no rush and looking to find something I can mod myself (no welding ability)

Any suggestions on this? Thanks
-Junkyard Jeff

[Cudajason]

@Cuda jason

Thanks! Brads70 mentioned you may have more info on a seat that has a bolt on application... or at least close.
I have read through most of the posts and like the look of the Hyundai seats. I could probably pay someone to to fabricate those but am in no rush and looking to find something I can mod myself (no welding ability)

Any suggestions on this? Thanks
-Junkyard Jeff

I just posted in the other thread.

Here is the link to my thread.  no welding required.

https://forum.e-bodies.org/interior/6/my-seat-project/2457/

All you need is the ability to measure, cut and drill metal.

Jason

[JunkYardFind]

@Cuda jason

I just posted in the other thread.

Here is the link to my thread.  no welding required.

https://forum.e-bodies.org/interior/6/my-seat-project/2457/

All you need is the ability to measure, cut and drill metal.

Jason

@Cuda jason
Thanks for this! Measure, cut & drill I can do!
Now to find a good set of Tiberon seats! Gonna take my time but I will post when I get the seats, pull my OE ones and get a better idea on this mod. Again, thanks for the help.

[Cudajason]

Thanks for this! Measure, cut & drill I can do!
Now to find a good set of Tiberon seats! Gonna take my time but I will post when I get the seats, pull my OE ones and get a better idea on this mod. Again, thanks for the help.

my pleasure man.  That's what we do around here!

Jason