WTB 71 cuda door striker nos #3454485

[71GranCoupe]

As much as I would hate this topic to end....

No pictures so I'm not sure how legit this item is. It says NOS but who knows.

https://www.ebay.com/itm/195584860783?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tw8LQ6gxR2m&sssrc=2349624&ssuid=iT6G0KWLTBa&var=&widget_ver=artemis&media=SMS


Sent from my iPhone using Tapatalk

The description with the torx head sounds like it might be the real deal. The seller accepts returns, so that is encouaraging as well

[Moparmade]

Thanks for letting me know
I tried to contact the person will not send
A picture says in another warehouse the person
Says also first part number not sure of and says fits
1970 to 1994

[6bblgt]

thanks for the "heads-up", called Mike & got a pair of strikers - the UPS man left them on the front steps today!! they'll look great against that AWESOME  FF4 "light green metallic"   

[TWS]

thanks for the "heads-up", called Mike & got a pair of strikers - the UPS man left them on the front steps today!! they'll look great against that AWESOME  FF4 "light green metallic"   

   

[anlauto]

thanks for the "heads-up", called Mike & got a pair of strikers - the UPS man left them on the front steps today!! they'll look great against that AWESOME  FF4 "light green metallic"   

Those are the nicest NOS ones I've ever seen .......................wait a minute...............you got your car painted ?

[Cuda_mark]

thanks for the "heads-up", called Mike & got a pair of strikers - the UPS man left them on the front steps today!! they'll look great against that AWESOME  FF4 "light green metallic"   

Did you get those from the eBay posting I sent?


Sent from my iPhone using Tapatalk

[Moparmade]

Looks good
Did it come with a thin washer spacer too?

[TWS]

Washers were only as needed for adjustment, at least three thicknesses used (from what I have seen).

[Moparmade]

Got it my door have one thin washer each

[69BFan]

The NOS over the counter door strikers that I have had through the years only had the thicker style washer.  I have not verified the part numbers, but were they superseded through the years.   Did they carry the same part number for the different applications, should have?  .  To my knowledge, they started in 67 with the A-Bodies and ran up through 76 with them.  Also used on 71-74 B-Bodies and 70 - 76 C-Bodies.

I know the ones that we provide through DCS have a thin and a thick washer.  Is the the third one a in-between thickness?  Do we need to offer an intermediate thickness of the washer?

Thanks,
Richard

[TWS]

I don't have them handy for pics and measurements. Perhaps someone else can chime in. I'm speaking of the washers that were separate from the striker itself.

[anlauto]

How do the DCS ones compare to the picture of Dan's posted above ?

[Moparmade]

Looks like roughly
Think washer .135
Thin washer .048

[VCODE]

Looks like roughly
Think washer .135
Thin washer .048

First off the large washer is part of the striker, does not come off. Second the thin washer is a shim added for adjustment or striker in or out

[6bblgt]

thanks for the "heads-up", called Mike & got a pair of strikers - the UPS man left them on the front steps today!! they'll look great against that AWESOME  FF4 "light green metallic"   

Did you get those from the eBay posting I sent?

Sent from my iPhone using Tapatalk

No, I called BE & A

Those are the nicest NOS ones I've ever seen .......................wait a minute...............you got your car painted ?

No, it's NOT shiney, yet .....