MATCHING NUMBERS Cuda

[Manuel]

The large pic with one big dial and four smaller ones lined up to the right

[cuda hunter]

The fender tag would be in the engine bay on the drivers side inner fender apron.  It will be about 2"x3" with a bunch of letter/number combos. 
The build sheet is a multi colored piece of paper that would most likely be pushed in the springs under the rear seat or on the rear seat back. 
could also be behind or under the front seats. 
It could also be taped behind the glove box

[cuda hunter]

Couple of pics for ya.  I hope you find these.  Makes a difference for numbers matching.

[Mopsquad]

You must get so many looks with that car.  Like it's some alien spaceship. lol

[Manuel]

Thanks for the very interesting info Hunter!

I'll try to find that paper and also take a pic of the data plate.  Do I just pull the rear seat up if needed?   

Mopsquad,  that's an abuse!    WOW!!   My hat is of to you, what a beauty!!   

[Cuda Cody]

Cool cuda @Manuel      And welcome to the forum.    

This might be of some use if you have time to take a look.

https://www.e-bodies.org/buying-your-first-e-body/vin-numbers/

[Manuel]

Thanks Cody!

Excellent Info.

What a valuable source of Info here in the forum.

Brgds to all!

[JS29]

@Manuel  What you have there is a standard gauge cluster! 

[Manuel]

Thank you JS29

--

Found this tags in the car.
No color paper under the front seats or in the back of them. First time they have been opened since new.

Do these metal tags have some of the valuable Info?

Still have to look in the back seat for the paper.

[Manuel]

Was thinking about the metal tags in the seats when I asked if they had valuable info.


Car needs good cleaning I know!   Sorry

[anlauto]

Wow that's a pretty darn early build date....cool

[Manuel]

Anyone knows how to lift the back seat?    Just pull up hard?

Back rest?

[cuda hunter]

there are two bolts that hold the top of the rear seat.  They are located between the two seats.
The lower seat pushes back and unhooks from two hooks, one on each side.
In this picture of the drivers side rear you can see the rectangle mount for the bolt and the "hook" for the lower seat. 

[cuda hunter]

E55-340 290 Hp
D21-a833 4 speed manual
B-barracuda
S-special
23-2 door hardtop
H-340
1-1971
B-hamtramck plant
100369-vin number.  (i believe the 369th built in 1971)
ev2-Torred
H-high
6-bucket vinyl
x9-black
000- upper door jamb color (no color,no jamb)
802-scheduled production date (August second 1969) Very early
E55122-sequence number     (not sure of what the "E" means)
ev2-top color
I or U ?  Can't read exactly
B51-power brakes
C55-bucket seats front
H25-heater delete
J45-hood tie down pins
J54-sport hood
M21-drip rail moldings
M25-body sill molding
M31-body belt moldings
M88-deck molding treatment
N41-dual exhaust tips
N42-bright exhaust tips
26-
EN2-End of line

[cuda hunter]

The little square tag is an inspectors tag with a specific inspectors stamp on it.  I can't make out what number/letter the stamp has.

Could you post another picture of the little square tag as well as a pic of the import tag.

That is a super cool car!  Glad it retains all it's tags.

the tags in the seats are going to give you date's of when the seats were made.  Not necessarily specific to the car but definitely helps to know they were the original seats in the car.  I've not yet nailed down the decode dating of the seats yet.