Brakebooster

[soundcontrol]

Does a brake booster from a 70 Charger fit on my 70 Barracuda? Charger had drums, so does mine.

[Fastmark]

No, that's a 68-70 b body. You need the flatter one.

[soundcontrol]

No, that's a 68-70 b body. You need the flatter one.

@Fastmark. Damn, I already bought it, in shipping now, ýou sure?
No need for OE, just function.

I looked around a lot, found this so I thought it would work...
https://www.yearone.com/Product/challenger-cuda/6374bb2

[headejm]

Once you receive it, try to bolt it up and see if it fits. As long as there is no installation interference, it should work. Would assume you will need new brake lines. 

[Topcat]

It should work if you have the offset linkage set up like Hemi's use.

E body Hemi cars use them. 

https://www.ebay.com/itm/1970-74-Mopar-Cuda-E-Body-1971-74-B-Body-OE-Style-Brake-Booster-Master-Kit/162364176993?hash=item25cda8ba61:g:TDAAAOSwfiZckQKL

[soundcontrol]

It should work if you have the offset linkage set up like Hemi's use.

E body Hemi cars use them. 

https://www.ebay.com/itm/1970-74-Mopar-Cuda-E-Body-1971-74-B-Body-OE-Style-Brake-Booster-Master-Kit/162364176993?hash=item25cda8ba61:g:TDAAAOSwfiZckQKL

Yeah, the guy I bought it from said he'll include the offset linkage.
Hope it works! 

Can I use my brake cylinder, or are they different for a servo setup? (Just bought a new one a month ago)

[6bblgt]

if it is original Mopar, that's either:
  a B/C-body disc brake Bendix dual-diaphragm power booster - it has 5/16" bolts on the backside that go thru the firewall
or
  a HEMI E-body Bendix dual-diaphragm power brake booster    3/8" bolts on the backside & in a different pattern from the above booster it bolts to the offset linkage

the booster with small differences was used early '60s c-bodies. Studebakers & others

[6bblgt]

a reproduction is available

https://www.doctordiff.com/bendix-style-dual-diaphragm-booster.html#:~:text=Reproduction%20Bendix%20dual%20diaphragm%20brake%20booster%20provides%20maximum,E-bodies%20includes%20firewall%20stiffening%20plate%20and%20under-dash%20linkage

[Fastmark]

It may work but if it bolts up and the rod to the pedal is the correct length. B and C have different lengths. Be sure and get the linkage that fits the booster. They have different size holes.

[Topcat]

On my Hemi, there are these 4 spacers like the small one used on the alternator meeting between the block and  alternator.

4 of them to keep spacing correct for the lower linkage to be properly aligned.

[soundcontrol]

Got it today. Not a Hemi, (has 5/16 bolts).
Hmm... it's weird, the linkage I got with it does not seem to fit on the bolt to the booster.
I think that linkage is to move the whole brakebooster up from Hemi valve covers...

The bolt pattern on the booster matches the upper and lower bolts in my firewall though.
But I did not get that little linkage I see in the link that @6bblgt  posted. (pictured below, last, not mine)
I guess I need that. Will look for one here in Sweden

[Mrbill426]

Just a install question.  The foam gasket goes on the inside of the firewall (under the dash) right?

[soundcontrol]

Just a install question.  The foam gasket goes on the inside of the firewall (under the dash) right?

I think that goes on the outside of the firewall, (correct me if I'm wrong though).

[6bblgt]

Got it today. Not a Hemi, (has 5/16 bolts).
Hmm... it's weird, the linkage I got with it does not seem to fit on the bolt to the booster.
I think that linkage is to move the whole brakebooster up from Hemi valve covers...

the linkage is for HEMI & the bolt size and pattern are different    are you installing a HEMI in your car?

  find the correct parts  - in the long run it will be easier/correct (once you modifying one part to fit it starts changing everything associated
& surely you can find someone in Europe that can use the b-body disc brake booster & the HEMI linkage

[6bblgt]

the foam gasket goes between the reinforcement plate & the booster