E Body Dana 60 E Brake cable question....

[anlauto]

On an 1970 E Body the passenger emergency brake cable is long and crosses over the rear axle and connects on the driver's side with the other cables.

With an 8 3/4 that long cable is secured to the floor up by the brake line. Is a Dana 60 the same or does it use the tab on the passenger side tube ? 

[Cuda Cody]

Pretty sure same as 8 3/4.  I think the tab on the tube is for the hard line.  Hopefully these photos help. 

[Cuda Cody]

Few more photos

[B5Cuda440-6]

Alan -

The passenger brake cable on a 1970 E-Body Dana is secured on the passenger side axle tube and to the floor by the brake line fitting.

[Cuda Cody]

Now I'm going to have to go out in the shop and look at a car..       Stand by....

[fc7cuda]

Alan -

The passenger brake cable on a 1970 E-Body Dana is secured on the passenger side axle tube and to the floor by the brake line fitting.

[Cuda Cody]

Does this help?  (don't mind the red bolt, just threaded it in to hold it there so I could take the photo)

[RUNCHARGER]

Yep: That looks right.

[anlauto]

Yea...Thanks for all the replies guys I was having a bit of a brain fart this afternoon working on a Dana....I thought if I bolted it to the rear end, it would be at an awkward angle then going to the floor.... but then I looked at some of my own pictures...... .....guess I was distracted