E-Brake Cable Routing at Rear w/Sway Bar?

[Floyd]

70 Challenger - Do I have the routing of the e-brake cable that goes to the RH rear drum correct?  Or does it need to slip between the metal brake line and the floor? 

Also, I assume I have the rubber hose correct?  I don't think it's long enough to go in front of the sway bar.

Thanks!

[Dakota]

  I have the same question.  Thanks for posting.

[Burdar]

I found a link with lots of pictures of a Challenger T/A.  Looks like the hose runs on top of the sway bar like you have it.  Not that this picture means it's 100% correct.  I'd jack the rear end up into place so it's at ride height.  Then see which way the hose wants to be mounted. 
https://transamflorida.com/1970challengerTA340.htm

[Chryco Psycho]

 
You have it correct

[Floyd]

Thanks guys. I asked a friend to send me some pics from his 70 340 Cuda survivor car.  I'll post them when I get them.

[Mrbill426]

 

[Mrbill426]

@Floyd if I may ask, where did you get that sway bar assembly?  Or is it your original?

70 Challenger - Do I have the routing of the e-brake cable that goes to the RH rear drum correct?  Or does it need to slip between the metal brake line and the floor? 

Also, I assume I have the rubber hose correct?  I don't think it's long enough to go in front of the sway bar.

Thanks!

[Floyd]

Bill - Original sway bar.