Main Menu

ESPO springs

Started by gaddied, October 07, 2020, 12:04:10 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

gaddied

Well my 340 Cuda after 50 years the rear end has sagged . So I have decided to replace the rear leaf springs. I was thinking of do the 1 inch over stock height and replacing all the hardware and shackles . 
My question is How are the ESPO springs for fit and height ?


Brads70

I used them on my car, no complaints. Great company to deal with! One stop shopping for new u-bolts etc...  :bradsthumb:

Rich G.

This is there stock spring.


gaddied

Quote from: Rich G. on October 07, 2020, 01:12:44 PM
This is there stock spring.
Is your front end stock height or is it lowered ?

Rich G.

It's probably a little low but thats the look I like.

GrandpaKevin

#5
I'm real happy with ESPO springs.

The Mopar XHD springs will sag.

The tire height you plan to use has a lot to do with picking leaf spring rate.

Here is ESPO 1.5" springs with 275/60-15 rear tires, 28" tall.

Skdmark

If you want another option.

I recently did a spring replacement on my Barracuda. I used Eaton Detroit Spring's HD with +1 inch. Ordered off their website and had them to my door in about 2.5 weeks. They are made in Detroit. Cost was a little higher than ESPO. Picked up new shackles, hangers and hardware from Roseville and used the forum member discount.

Very happy with the fit and height.
You are not entitled to your opinion. You are entitled to your informed opinion. No one is entitled to be ignorant.
-Harlan Ellison

(O OI====II====IO O)    (O O{]{]{] ][ [}[}[}O O)
:stayinlane: