Main Menu

1970 Challenger T/A Convertible Project

Started by erik70rt, September 08, 2019, 03:13:40 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

erik70rt

Removed the old worn out axle bearings.
Contrary to the opinions of some, I am not dumber than I look.

erik70rt

New heads and rockers installed.
Contrary to the opinions of some, I am not dumber than I look.

erik70rt

Made some good progress today.  Pressed the new bearings on the rear axles, then installed the backing plates and axles, then the rear brake lines and rear brakes (except the parking brake for now).  Then put on the drums and wheels.  Filled the differential with gear oil and its finally sitting on the rear suspension.  Tomorrow I'll start the front... 
Contrary to the opinions of some, I am not dumber than I look.


erik70rt

Upper control arms installed.
Contrary to the opinions of some, I am not dumber than I look.

erik70rt

340 is almost finished
Contrary to the opinions of some, I am not dumber than I look.

erik70rt

Sorry I haven't posted in a bit on this.   Just got the car back from the painter this past weekend. 

Other than that I've just been accumulating more parts.  I'll now be getting back to it and posting more progress pics. 

Contrary to the opinions of some, I am not dumber than I look.

70 Top Banana

So, I know. This topic has come up on more than once but I am looking for the correct engine paint code for the engine in a 1970 Challenger T/A 340 6 pak. I looked and looked but could not find anything in the forum. Thanks!