Main Menu

`70 road runner, FC7, 383, 727 It`s waited long enough, finally time

Started by torredcuda, October 14, 2022, 11:52:41 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

torredcuda

It doesn't look like much progress but hundreds of spot welds to drill out to remove trunk pan. Quarters and extensions showed up so I just need to keep at it.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/

nsmall

70 Road runners have to be one of the most best looking muscle cars ever!!!  Nice progress.

torredcuda

Trunk floor is out, just needs some clean up and I can start fitting the new one.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/


torredcuda

Rails are solid but I found what looks like tow hook damage and wheel well a bit caved in on passenger side but both easily fixed.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/

adm413

Good luck with the resto! I love 70s and restored my 70 GTX years ago. Lots of work but so worth it

torredcuda

First test fit of trunk pan, dropped right in and looks good, maybe some minor tightening up of the edges.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/

torredcuda

Comparing the AMD panel to some originals I found four obvious differences with the strengthening ribs. A little time with a propane torch, hammers and dolly's and a body file and all fixed.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/


usraptor

Quote from: torredcuda on November 17, 2022, 10:51:50 AM
It doesn't look like much progress but hundreds of spot welds to drill out to remove trunk pan. Quarters and extensions showed up so I just need to keep at it.
I remember drilling out all spot welds on my '70 'Cuda to remove the exact same panels plus the dutchman panel.  I lost track of how many spot weld drill bits I went through.  I thought I'd never finish.  Seemed like there were millions of spot welds!

torredcuda

Then more drilling of holes in the new panel.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/

torredcuda

Haven't updated in a while but still making slow progress. Working on patching lower rear window corners which are commonly rusted on these cars and got the extensions welded in.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/

torredcuda

I've been struggling getting the drivers quarter panel to fit correctly but finally got it. I had to massage some areas and move the front edge back 1/8" to get the door gap. Now just need to fit the passenger side which should go quicker now that I know where it needs fitting.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/


torredcuda

Reviving my thread. Work on it has been slow but it is progressing. Quarters took some work to fit good but I'm pretty happy with them.
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/

torredcuda

:)
Jeff   `72 Barracuda 340/4spd
https://www.facebook.com/jeffrey.hunt.750

Northeast Mighty Mopar Club
https://www.facebook.com/groups/1486087201685038/

Brads70

Nice job, going to be a sweet ride! One of my top 5 favorites.

cuda hunter

"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee