`70 road runner, FC7, 383, 727 It`s waited long enough, finally time

[torredcuda]

It doesn't look like much progress but hundreds of spot welds to drill out to remove trunk pan. Quarters and extensions showed up so I just need to keep at it.

[nsmall]

70 Road runners have to be one of the most best looking muscle cars ever!!!  Nice progress.

[torredcuda]

Trunk floor is out, just needs some clean up and I can start fitting the new one.

[torredcuda]

Rails are solid but I found what looks like tow hook damage and wheel well a bit caved in on passenger side but both easily fixed.

[adm413]

Good luck with the resto! I love 70s and restored my 70 GTX years ago. Lots of work but so worth it

[torredcuda]

First test fit of trunk pan, dropped right in and looks good, maybe some minor tightening up of the edges.

[torredcuda]

Comparing the AMD panel to some originals I found four obvious differences with the strengthening ribs. A little time with a propane torch, hammers and dolly's and a body file and all fixed.

[usraptor]

It doesn't look like much progress but hundreds of spot welds to drill out to remove trunk pan. Quarters and extensions showed up so I just need to keep at it.

I remember drilling out all spot welds on my '70 'Cuda to remove the exact same panels plus the dutchman panel.  I lost track of how many spot weld drill bits I went through.  I thought I'd never finish.  Seemed like there were millions of spot welds!

[torredcuda]

Then more drilling of holes in the new panel.

[torredcuda]

Haven't updated in a while but still making slow progress. Working on patching lower rear window corners which are commonly rusted on these cars and got the extensions welded in.

[torredcuda]

I've been struggling getting the drivers quarter panel to fit correctly but finally got it. I had to massage some areas and move the front edge back 1/8" to get the door gap. Now just need to fit the passenger side which should go quicker now that I know where it needs fitting.

[torredcuda]

Reviving my thread. Work on it has been slow but it is progressing. Quarters took some work to fit good but I'm pretty happy with them.

[torredcuda]

[Brads70]

Nice job, going to be a sweet ride! One of my top 5 favorites.

[cuda hunter]

Lookin good Jeff.  Joining in for the fun.