A.G.A.R. FF4 AAR - Day Three hundred & seventy-nine

[anlauto]

Some pictures for @Car-nutt ....Here's those brackets and their position we were talking about....

...and as you can see...this in an infamous "Rock" car.....looks like he was working on the left side of the line this day...

Original carpet has brass loops at the rear...

[anlauto]

AAR Cuda and likely T/A Challenger rear antenna cable routing ...

[anlauto]

Some weird 70 only small floor plugs

[anlauto]

Some pretty rusty floor pans

[anlauto]

we're getting there....The parts that have been remove have also been tagged, bagged or organized as I go....Also putting aside parts like the seat belts which I'll send out to Bill Edwards and latches heater blower motor etc...which will go to Stephan Fournier...Those will go out next week.

[kdcarman]

Some pretty rusty floor pans

I would replace them for sure.

[anlauto]

Found this little clip on the driver's side tail light housing on the lower outer stud. It holds the wire harness in place and often missing on cars that have been messed with over the years...


Found it odd that the trunk lid catch is cad silver, a lot of them are painted body colour...

[6Pack70]

Thank you for taking the time to post up some great detail photos Alan,  I'm sure many enthusiasts here appreciate it.  Myself incuded 

[Rich G.]

Under the dash and firewall wasn't painted? No wonder why they rust. That one doesn't look that bad.

[Brads70]

Very clean wow Nice! I see "Rock" signed that car too. Must have been a busy guy! LOL
I hope your not going to blast all the "history " off the car like the rock signature. This one seems too clean to do that to?

[RUNCHARGER]

That's a sweet Hot Rod.

[blown motor]

Thank you for taking the time to post up some great detail photos Alan,  I'm sure many enthusiasts here appreciate it.  Myself incuded 

I imagine there aren't many cars that are this unmolested that allow us to see exactly how they came from the factory.

[Car-nutt]

Thank You for posting Alan, I am getting mine back on Friday. Going to start putting it back together on the weekend. The fun begins.

[zazou]

Hello,
work!.....

[anlauto]

This is what happens when you miss with the spot weld gun and nobody in QA notices it 

Notice the screws holding the valance on