Main Menu

A.G.A.R. FF4 AAR - Day Three hundred & seventy-nine

Started by anlauto, November 26, 2018, 01:52:51 PM

Previous topic Next topic

0 Members and 4 Guests are viewing this topic.

Jay Bee

Alan, were those tail light housings restored by Stephan or did you find a suitable paint to spray them with. Since my car will be going under the knife soon mine are out and I'd like to do something with them other than leave them bare. Thanks, John.

anlauto

You nailed it John !
Restored by @SF-Resto ...the best in the business  :twothumbsup:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

anlauto

Day 359...

Got the engine transmission done....coming right along....
(ride Height is not set yet)
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


anlauto

No fancy hoists or carts here...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

1972V21Cuda

Quote from: anlauto on November 20, 2019, 11:59:03 AM
No fancy hoists or carts here...

In order to lift the front end like that, what are your lifting points? Thanks!

Topcat

Quote from: 1972V21Cuda on November 26, 2019, 08:49:06 PM
Quote from: anlauto on November 20, 2019, 11:59:03 AM
No fancy hoists or carts here...

In order to lift the front end like that, what are your lifting points? Thanks!


Really simple.

Build plates off where the bumper brackets bolt onto. Make a cardboard template.
Weld extension 1" stock. Have it extend about 2 feep past where bumper would be.

Then a cross bar. Ready to lift with Cherry picker and a chain.

Now CP  will chime in about a leveraging technique. .Choose your method. Up to you.





anlauto

Quote from: 1972V21Cuda on November 26, 2019, 08:49:06 PM
Quote from: anlauto on November 20, 2019, 11:59:03 AM
No fancy hoists or carts here...

In order to lift the front end like that, what are your lifting points? Thanks!

I prefer a much simpler approach....there's two holes in the front frame just ahead of the K Frame bolt holes. I use two heavy duty tie down straps hooked to the engine hoist right where you see it in the picture. The entire grill, bumper etc...remains in place, no need to make and brackets etc...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


anlauto

Oops....I wanted to do a "one year" post, but that was yesterday... :headbang:

So day #366....
The process is moving right along. I just snapped these pictures 5 minutes ago.
The underside is completely finished, all the glass is in and adjusted. Got the headliner in and it looks great, engine compartment just about done.
After typing this ....I'm going back out there to tackle the strobe stripes.... :).
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

kdcarman


js27

Beautiful Work---but does look funny without the stripes..
JS27

anlauto

Quote from: js27 on November 27, 2019, 09:00:35 AM
Beautiful Work---but does look funny without the stripes..
JS27
Thank you :worship: , and this is just because I agree with you...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


Challenger in NC


anlauto

Quote from: kdcarman on November 27, 2019, 08:44:13 AM
Looks great!  Quick year.
Yes, it's been quite a year....now we need to find you that TX9 AAR project  :D
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

JS29


anlauto

FF4...Looks dark in the pictures....the under hood shot shows it best I guess...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration