Main Menu

AGAR...TX9 Six Pack ...GOOD BYE....

Started by anlauto, June 16, 2017, 05:16:11 PM

Previous topic Next topic

0 Members and 4 Guests are viewing this topic.

Print
Go Down Pages 1 ... 9 10 11 12 13 ... 16
User actions

YellowThumper

#150
March 08, 2018, 07:34:46 AM
Ha ha. I am the one my neighbors hate because some are left outside...
Quote from: anlauto on February 23, 2018, 07:27:58 AM
Quote from: 72 Challenger on February 23, 2018, 06:49:41 AM
I wasn't trying to offend you or say you left these outdoors. It was more that the volume and quality of the cars surprises no one anymore.

Yea ...I know.....what I meant was...the deal with my wife is "THERE'S NEVER ANYTHING LEFT SITTING OUTSIDE THE HOUSE".....no rusted cars in the driveway etc....
Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.

Spikedog08

#151
March 08, 2018, 07:41:02 AM
Yeah my home owners association would not be happy about having crap sitting outside.  Cant even park my boat in my driveway for long. 

:bricks:
Drive it like you stole it . . . And they're CHASING you!

GCragtop

#152
March 08, 2018, 11:02:57 AM
Quote from: anlauto on March 08, 2018, 03:55:53 AM
Quote from: GCragtop on March 08, 2018, 12:02:35 AM
Alan. What kind of method you use to install door top moldings? I have original moldings on my car but cant get them installed... repro clips came from MegaParts.

This car also has original moldings and reproduction clips. I held the moldings in place, marked the area where the clips go in the trim. Then with my small grinder, I opened up the areas on the trim, a little on each side.
Just another PITA when dealing with reproduction parts :pullinghair:

Thanks for the info - I need to try something similar...

nsmall

#153
March 08, 2018, 09:49:38 PM
Quote from: anlauto on March 06, 2018, 12:33:05 PM
Man I love installing side glass :drooling:

You are a sick man Alan.  Looking good!

YellowThumper

#154
March 10, 2018, 07:24:04 PM
Quote from: Spikedog08 on March 08, 2018, 07:41:02 AM
Yeah my home owners association would not be happy about having crap sitting outside.  Cant even park my boat in my driveway for long. 

:bricks:

Our association does not allow work trucks to be parked at home over the night.
Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.

anlauto

#155
March 15, 2018, 03:01:19 PM
I can't see stripes....Can you see stripes?  :rubeyes: :rofl:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

YellowThumper

#156
March 15, 2018, 03:28:55 PM
Nice checkerboard reflections...
Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.

blown motor

#157
March 15, 2018, 04:38:18 PM
Very shuttle Alan. I think they will show more in the sun.
Who has more fun than people!
68 Charger R/T    74 Challenger Rallye 
12 Challenger RT Classic    15 Challenger SXT
79 Macho Power Wagon clone    17 Ram Rebel

Cudajason

#158
March 15, 2018, 04:53:40 PM
yes..kind of.  Good lord that looks great!

Jason
1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.

bluespruce

#159
March 15, 2018, 05:19:45 PM
They will look great, there but will have to look twice to see them

RUNCHARGER

#160
March 15, 2018, 06:50:02 PM
Pull those little things off, prime the quarters. done.
Sheldon

anlauto

#161
March 15, 2018, 07:35:04 PM
A small confession.....This car left the factory a TX9 black car, with a V1X black vinyl top and H6X9 black interior.....but regrettably not coded for the V6X black stripe :crying:....but who can blame the owner for wanting to add that very subtle touch that SCREAMS coolness :drooling:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

RUNCHARGER

#162
March 15, 2018, 09:01:05 PM
For sure, I would probably do the same. And a heat gun makes it correct in about 5 minutes.
Sheldon

HEMICUDA

#163
March 16, 2018, 05:11:36 PM
Quote from: anlauto on March 15, 2018, 07:35:04 PM
A small confession.....This car left the factory a TX9 black car, with a V1X black vinyl top and H6X9 black interior.....but regrettably not coded for the V6X black stripe :crying:....but who can blame the owner for wanting to add that very subtle touch that SCREAMS coolness :drooling:

All 70 "Cudas" came standard with hockey stick stripes with the only available color being black.

anlauto

#164
March 16, 2018, 06:21:26 PM
Quote from: HEMICUDA on March 16, 2018, 05:11:36 PM
Quote from: anlauto on March 15, 2018, 07:35:04 PM
A small confession.....This car left the factory a TX9 black car, with a V1X black vinyl top and H6X9 black interior.....but regrettably not coded for the V6X black stripe :crying:....but who can blame the owner for wanting to add that very subtle touch that SCREAMS coolness :drooling:

All 70 "Cudas" came standard with hockey stick stripes with the only available color being black.

Sorry, but that's totally incorrect information. Challenger RT's came standard with stripes, On all Cuda's stripes were optional.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration
Print
Go Up Pages 1 ... 9 10 11 12 13 ... 16
User actions

Similar Topics