Door mirror hole location

[BAM]

Hello guys,

as I recently replaced most of the sheet metal on my 1970 Challenger SE, I would need some measurements for the door mirrors to be installed. Your help is always appreciated.

[Dakota]

If you don't see a response from someone else in the next couple of days, I'll pull my mirrors off and get you some measurements on the hole placement.   

[BAM]

@Dakota I appreciate that. Thank you!

[MKA]

If you do a forum search on "mirror measurements " you will see a number of topics that may have what you need such as

https://forum.e-bodies.org/body-shop/5/1970-challenger-driver-door-mirror-location/7040/msg97730#msg97730

Good luck, car is looking good.

[BAM]

If you do a forum search on "mirror measurements " you will see a number of topics that may have what you need such as

https://forum.e-bodies.org/body-shop/5/1970-challenger-driver-door-mirror-location/7040/msg97730#msg97730

Good luck, car is looking good.

@MKA thank you! I already searched the forum for that. My main request is on the holes LOCATION and not the size. I literally don't know where the mirrors should be placed on the doors.

[anlauto]

First hole is 17" from the front

[Jay Bee]

From cataclysm80 on Moparts. He's a member here also but hasn't been active for a while.

measurements from my own E bodies...

70 challenger drivers side 1 3/16 down from body line, 17 1/4 & 20 1/4 from front door edge.

70 �Cuda driver side 3/4 down from body line, 17 1/2 & 20 1/2 from front door edge.

Tav

[Jay Bee]

Blown up and cropped...

[70pumpkin]

The info might be here https://forum.e-bodies.org/reference-material/18/e-body-hole-locations-firewall-door-interior-ect/303/135
Long thread but a ton of great info.

[BAM]

Thank you all, mirrors are now installed.