1970 Challenger R/T Project - SOLD

[erik70rt]

SOLD!!!!:  1970 Dodge Challenger R/T Project

I have decided to sell my R/T project.  I originally purchased it in 2019 as a rolling body with the original dash pad with the VIN tag still attached and the original fender tag.  The car is originally a 383 3-spd on the floor - one of 355 built.  Hemi orange with a white interior and white side stripes.  Car is an original A/C car with power steering and power disc brakes (disc setup is still on the car).  I sold it in 2020 but recently bought it back with the intention of restoring it back to original.  I have since decided that I don't want this big a project and am now selling it.  Since my original purchase, I have picked up the following for it:

grille with black paint
steering column with wheel
a/c heater box
a/c compressor
back seat
383 short block
big block exhaust manifolds
disc brake distribution block/proportioning valve setup
power brake booster
hood hinges
fuel fill tube
e body three speed with correct large bearing and linkage
set of 5 14" rallye wheels (4 are restored with center caps, trim rings and new tires)
dash frame /pad assembly with A/C vents
NOS wheel well mouldings

Car is pretty solid and has the original hood and trunk lid.  The trunk floor is already cut out and the frame rails are good.  The floor pans need some small pinhole patchwork.  The quarters and solid with the exception of the lower section on the driver's side in front of the wheel well.  There was some previous bodywork done on the firewall, radiator support and near the rear window that will need to be finished.

Car has a clean PA title.

Please see the pics and feel free to ask any questions.

All sales final.

15K Firm

I'm not interested in any trades.

Car is located in the Clinton, NJ area.