Main Menu

Clock Rebuilder?

Started by hrtbkr, October 30, 2023, 10:30:06 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

hrtbkr

Hi I'm putting together a rallye dash for my'70 Barracuda and looking for someone to convert/rebuild the clock.
I talked to a vendor at Mopars in the Park, but he wasn't inspiring much confidence.
Anyone have recommendations?
Thanks

headejm

Check out these guys. I bought their kit but have never installed it. They will do the installation for you.

https://www.clocksandgauges.com/quartz-conversion.html

B5fourspeed



blown motor

@Jay Bee  You have some experience with this don't you?
Who has more fun than people!
68 Charger R/T    74 Challenger Rallye 
12 Challenger RT Classic    15 Challenger SXT
79 Macho Power Wagon clone    17 Ram Rebel

PLUM72

This was a DIY project.  Between the kit and instructions from Clocks and Gages, their YouTube video, and the attached instructions from when RT Engineering used to have a clock kit, it wasn't too bad installing.
-Dave
'72 Challenger
'13 Challenger

318Stroker

#5
Quote from: headejm on October 30, 2023, 11:19:43 PM
Check out these guys. I bought their kit but have never installed it. They will do the installation for you.

https://www.clocksandgauges.com/quartz-conversion.html

I had them do the quartz conversion some years back on my Challenger clock. It still works great and keeps perfect time.

Jay Bee

Quote from: blown motor on October 31, 2023, 08:29:54 AM
@Jay Bee  You have some experience with this don't you?
Yes, 3X. I was thinking of chiming in but it seems the OP wants some to do it for him rather than a DIY. The PDF that PLUM72 linked is priceless, the instructions that come in the box are terrible. My only suggestion would be to have a second set of hands when installing the 3 small face rivets (point 17 in the posted PDF). I had a rivet clincher for that step.