Clock Rebuilder?

[hrtbkr]

Hi I'm putting together a rallye dash for my'70 Barracuda and looking for someone to convert/rebuild the clock.
I talked to a vendor at Mopars in the Park, but he wasn't inspiring much confidence.
Anyone have recommendations?
Thanks

[headejm]

Check out these guys. I bought their kit but have never installed it. They will do the installation for you.

https://www.clocksandgauges.com/quartz-conversion.html

[B5fourspeed]

Redline gauges

[blown motor]

@Jay Bee  You have some experience with this don't you?

[PLUM72]

This was a DIY project.  Between the kit and instructions from Clocks and Gages, their YouTube video, and the attached instructions from when RT Engineering used to have a clock kit, it wasn't too bad installing.

[318Stroker]

Check out these guys. I bought their kit but have never installed it. They will do the installation for you.

https://www.clocksandgauges.com/quartz-conversion.html

I had them do the quartz conversion some years back on my Challenger clock. It still works great and keeps perfect time.

[Jay Bee]

@Jay Bee  You have some experience with this don't you?

Yes, 3X. I was thinking of chiming in but it seems the OP wants some to do it for him rather than a DIY. The PDF that PLUM72 linked is priceless, the instructions that come in the box are terrible. My only suggestion would be to have a second set of hands when installing the 3 small face rivets (point 17 in the posted PDF). I had a rivet clincher for that step.