Do you have your fender tags and/or buildsheet?

[MOPAR FANATIC]

I have both for my '71 challenger 340 car.even though I'm not positive where the tag is.i'm sure I put it in my dressor drawer,haven't looked in awhile.

have all documentation for my 2013 plum crazy challenger R/T.Bought it new right of the showroom floor.i don't think I even opened up the manual yet,no time to look at manual.just drive the beast,WAY TO MUCH FUN.....lol 

[chal340]

I have only the fender tag for my Challenger.

[MOPAR FANATIC]

  Since were on the subject and some members may not know where to look for a buildsheet here's a few locations you can look for it.
1.back of the glove box tape to the plastic housing  {where in found mine}
2.underneath the rear seat tucked into the springs.  {most common I believe}
3.behind the two front seat back panels.
anywhere else fella's,off the top of my head. 

[GoodysGotaCuda]

Let's hear about your E body documentation.

I have both, but nobody really cares about the pedigree behind a 72 318/904 Barracuda!


Sent from my iPhone using Tapatalk

The good side of that is that you have a feeling of freedom to do whatever you want to the car. Pixie's Duster has the same engine/tranny combo with a 7.25 rear. Everything is so much smaller than what was in my Challenger!

Yep.





Sent from my iPhone using Tapatalk

[1 Wild R/T]

Let's hear about your E body documentation.

I have both, but nobody really cares about the pedigree behind a 72 318/904 Barracuda!


Sent from my iPhone using Tapatalk

The good side of that is that you have a feeling of freedom to do whatever you want to the car. Pixie's Duster has the same engine/tranny combo with a 7.25 rear. Everything is so much smaller than what was in my Challenger!

Yep.





Sent from my iPhone using Tapatalk

Is That Numbers Matching??? 

[GoodysGotaCuda]

Let's hear about your E body documentation.

I have both, but nobody really cares about the pedigree behind a 72 318/904 Barracuda!


Sent from my iPhone using Tapatalk

The good side of that is that you have a feeling of freedom to do whatever you want to the car. Pixie's Duster has the same engine/tranny combo with a 7.25 rear. Everything is so much smaller than what was in my Challenger!

Yep.

Sent from my iPhone using Tapatalk

Is That Numbers Matching??? 

The numbers block and trans are weighing the floor of my shed down.



Sent from my iPhone using Tapatalk

[MOPAR FANATIC]

Let's hear about your E body documentation.

I have both, but nobody really cares about the pedigree behind a 72 318/904 Barracuda!


Sent from my iPhone using Tapatalk

The good side of that is that you have a feeling of freedom to do whatever you want to the car. Pixie's Duster has the same engine/tranny combo with a 7.25 rear. Everything is so much smaller than what was in my Challenger!

Yep.





Sent from my iPhone using Tapatalk

Is That Numbers Matching??? 

Sure looks factory to me....

[bentpshrods]

 I got my car early enough that it still had it's tags and a complete build sheet.

[headejm]

Since were on the subject and some members may not know where to look for a buildsheet here's a few locations you can look for it.
1.back of the glove box tape to the plastic housing  {where in found mine}
2.underneath the rear seat tucked into the springs.  {most common I believe}
3.behind the two front seat back panels.
anywhere else fella's,off the top of my head. 

Under the carpet.

[MOPAR FANATIC]

Since were on the subject and some members may not know where to look for a buildsheet here's a few locations you can look for it.
1.back of the glove box tape to the plastic housing  {where in found mine}
2.underneath the rear seat tucked into the springs.  {most common I believe}
3.behind the two front seat back panels.
anywhere else fella's,off the top of my head. 

Under the carpet.

really,not sure iv'e heard of that before,learn someting new every day.thanks for the heads up to me and the members 

[JRMac73]

I have one more place to look and hoping the tag is behind the glove box.

Sent from my SM-G930V using Tapatalk

[mopar jack]

I concur under the carpet. Although it's my Road Runner from the L.A plant with a build sheet under the carpet and one behind the rear seat. My E-body Barracuda had both data tag and build sheet.

[wannadrag]

Neither,so if anyone in Arizona has a tag or sheet for a white N code 70 R/T shoot me a pm and I will share the vin. Car was repainted orange at one time also with a glass TA style hood.

[MOPAR FANATIC]

I have one more place to look and hoping the tag is behind the glove box.

Sent from my SM-G930V using Tapatalk

if ya haven'y look yet,reach way up underneath the lower glove box back of thr housing,i almost gave upp and that's where i found mine.gotta reach way back,it's tape to the housing and shoud be in great shape.good luck...

[JRMac73]

I have one more place to look and hoping the tag is behind the glove box.

Sent from my SM-G930V using Tapatalk

if ya haven'y look yet,reach way up underneath the lower glove box back of thr housing,i almost gave upp and that's where i found mine.gotta reach way back,it's tape to the housing and shoud be in great shape.good luck...

Thank you for the advice. I didn't have any idea where behind. When I get some time I'll have to for sure look. It's not a desired car but would be cool to have and see.

Sent from my SM-G930V using Tapatalk