Main Menu

door cuos

Started by pink aar, April 23, 2019, 12:56:14 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

pink aar

can someone tell me how to identify the  2 door panel cups from a driver and a passenger. I bought 2 of them and they look the same. thank you   Does any one a picture of the 2  I have 2 metal cups 70 cuda

MEK-Dangerous

#1
They are indeed the same. I hope you have the bracket that screws in below them to hold them in place.

anlauto

Really hard to described. With the flat edge laid on the table ...The lock lever hole goes towards the front... :looney: let me find a picture...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


anlauto

They're not both the same, there is a left and a right...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

anlauto

This is Cuda PASSENGER SIDE  :alan2cents: Challenger ones are completely different as well.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

pink aar

the guy must have sold me 2 driver cups , because the hole is on the opposite side when the cup is turned around. thanks Alan

Cudajason

Please let me know what side you have...I believe I have two of the same side too!!!

Jason
1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.



anlauto

Quote from: pink aar on April 23, 2019, 01:22:35 PM
the guy must have sold me 2 driver cups , because the hole is on the opposite side when the cup is turned around. thanks Alan

You lost me for a second...If you place the two cups flat side down on a table, the holes for the lock lever will be opposite of each other
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Claudia

Here are a couple of pictures that will hopefully help.  As mentioned above, LH and RH Cuda door pull cups are different and should have a hole for the door lock lever to come through.  First picture below is the backside of the driver side door panel and the third picture is the driver side door panel installed.

Jay Bee

Here's my offering for this thread.

pink aar

Thanks Alan, Claudia and Jay Bee for the pictures.   I guess the guy sold me 2 driver side cups. thanks again


anlauto

Well now that is the picture we were looking for..thanks Jay Bee  :drinkingbud:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration