Main Menu

Pictures of Nascar ,Trans Am /Road racing Mopars

Started by Brads70, February 26, 2017, 07:42:04 PM

Previous topic Next topic

0 Members and 5 Guests are viewing this topic.

Chryco Psycho


Chryco Psycho


Bullitt-

.                                               [glow=black,42,300]Doin It Southern Syle[/glow]       


Chryco Psycho

Mopars have always set records & been punished by the rule book

Chryco Psycho


Brads70

That one got wrecked first time out I think it was. Rebuilt another black/green and it too is sidelined with damages. He is still running the Falcon and a Porsche  I believe. 

Brads70



Chryco Psycho

I wonder what engine he is using  :thinking: seems to have a rear dist so maybe Mopar

RUNCHARGER

Dang: But no use racing if you aren't pushing it.
Sheldon

Bullitt-

#714
Quote from: Chryco Psycho on June 23, 2019, 06:29:57 AM
I wonder what engine he is using  :thinking: seems to have a rear dist so maybe Mopar
Notice the # 360 on the airbox on underside of the hood  :bradsthumb:
.                                               [glow=black,42,300]Doin It Southern Syle[/glow]       

Brads70

Quote from: Chryco Psycho on June 23, 2019, 06:29:57 AM
I wonder what engine he is using  :thinking: seems to have a rear dist so maybe Mopar

LOL I was ( typical) so focused on what he was doing for suspension I didn't even notice that !  :haha:
Ya must be a Mopar?


RUNCHARGER

Sheldon

Chryco Psycho

both Mopar & AMC made 360 Cid engines but AMC had a front dist position , could also be a small block chev

Brads70

Quote from: Chryco Psycho on June 23, 2019, 04:06:44 PM
both Mopar & AMC made 360 Cid engines but AMC had a front dist position , could also be a small block chev

Chev.... yuck not THAT would be sacrilege LOL Can you tell by the valve cover bolts?

Bullitt-

Quote from: Brads70 on June 23, 2019, 05:08:53 PM
Quote from: Chryco Psycho on June 23, 2019, 04:06:44 PM
both Mopar & AMC made 360 Cid engines but AMC had a front dist position , could also be a small block chev

Chev.... yuck not THAT would be sacrilege LOL Can you tell by the valve cover bolts?

between the distributor location, plug wires angle above exhaust, valve cover pattern & intake bolt angle I believe it to be an LA Mopar
.                                               [glow=black,42,300]Doin It Southern Syle[/glow]