Anyone Know of these Dash Pads on Ebay

[anlauto]

Does your tracking number say in transit when you track it?

Always a good question....some companies give out tracking numbers like candy...just to shut you up...

[70_440-6Cuda]

Does your tracking number say in transit when you track it?

GREAT question and I was worried about that - everything seemed slightly off - the computers were down Monday, then they had to take it to drop off at FedEx on Tuesday bc something was wrong with that system... started to worry then got a screen shot of the tracking receipt from the fedex location, and the tracking # showed up as received and in Transit by 5PM so I have to say I was a bit on the trusting side, BUT they came through exactly as they said they would...it is currently in AZ so the only remaining question is how the quality is when it gets here tomorrow (a day earlier than expected)  !

[B5fourspeed]

Glad to hear it is in transit.?

[Marty]

Does your tracking number say in transit when you track it?

GREAT question and I was worried about that - everything seemed slightly off - the computers were down Monday, then they had to take it to drop off at FedEx on Tuesday bc something was wrong with that system... started to worry then got a screen shot of the tracking receipt from the fedex location, and the tracking # showed up as received and in Transit by 5PM so I have to say I was a bit on the trusting side, BUT they came through exactly as they said they would...it is currently in AZ so the only remaining question is how the quality is when it gets here tomorrow (a day earlier than expected)  !

Did you get my PM?

[70_440-6Cuda]

Does your tracking number say in transit when you track it?

GREAT question and I was worried about that - everything seemed slightly off - the computers were down Monday, then they had to take it to drop off at FedEx on Tuesday bc something was wrong with that system... started to worry then got a screen shot of the tracking receipt from the fedex location, and the tracking # showed up as received and in Transit by 5PM so I have to say I was a bit on the trusting side, BUT they came through exactly as they said they would...it is currently in AZ so the only remaining question is how the quality is when it gets here tomorrow (a day earlier than expected)  !

Did you get my PM?

I didn't, just sent you one as well

[YellowThumper]

In for following this one myself.
Please update your experience once received.
Thanks

[Spikedog08]

Yes watching this as well . . I have a repo dash pad in my convertible and the fit sucks IMO. 

[70_440-6Cuda]

Out for delivery today as of 7 am so I will post tonight or tomorrow and get your feedback on how it looks!

[70_440-6Cuda]

Arrived today and at first glance looks awesome to me, but I am no expert.  First 2 pics are of my original dash just for reference.  I will try to get some better shots in the sunlight over the weekend - kids have sports etc. but I was too excited not to at least take a look.  I am probably not as particular as some may be as far as the graining goes.  I am extremely happy with the dash so far, we will see how it fits, but it looks fantastic sitting in my garage!

[JH27N0B]

The key is to how well it fits when you install it.
They always seem to need trimming.
I had a heck of a time installing my interior trim on the passenger side of my my car with my Ultimate Rides pad.
The A pillar piece was a really tight fit. And not long afterward I opened the passenger door and a little piece of the trim fell off, it was stressed by the tight squeeze and quickly failed.

[anlauto]

I've always been happy with the dozen or more pads I've purchased, but like you, I may not be as picky as others....

That pad looks great in my opinion...and also I think it's the best available currently.

[Marty]

It looks good to me! I'll send my core out next week.

[Spikedog08]

When are you going to install?  Looks like they have the one I want  . . . https://www.ebay.com/itm/294991137475?hash=item44aed78ac3:g:kgcAAOSwWjdijAgK&amdata=enc%3AAQAHAAAAoH3U%2F3H%2BR65QQP%2Bw1s9WN1%2B4RtV0ZI9UXxTmFOBs5p3%2BGKfcZVqCRFfYDWU6Nz5A5lBxqKdoJPk6%2Fox1Bu%2F4ljtwZ87I9EA5tnn56uYfV9JOjLdHNn8mkNZYbpSgBWiww1O2sdcbtlHsJ4jewP1rLB7Ly4iNs6qoTfBv%2FfK2ygttdtTvkbHFHRDrocEb%2BtArTT3rThk49NrJmFvW4DKVJg0%3D%7Ctkp%3ABk9SR8rWoeLfYA

[blown motor]

 

[Katfish]

I'd check all the edges / contours around the bottom where it matches up to plastic pieces.........