Main Menu

Voltage Regulator Bracket

Started by Daveh, January 28, 2019, 06:27:00 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Daveh

January 28, 2019, 06:27:00 PM
Hi Guys,

Is the voltage regulator bracket grounded.  I would like to put a little insulation on the back to limit scratching the paint.  Thanks

Chryco Psycho

#1
January 28, 2019, 06:34:18 PM
That is the ECU not the VR but yes they need to ground at least through the screws

Chryco Psycho

#2
January 28, 2019, 06:35:09 PM
the correct bolts would have washers with barbs on the washer to bite through the paint

Daveh

#3
January 28, 2019, 06:38:52 PM
I do have the bolts.  Thanks

dodj

#4
January 28, 2019, 07:00:30 PM
Doesn't appear to be a factory bracket.  At least the one i had supported the entire back of the ecu. The ecu did not overhang.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

Daveh

#5
January 28, 2019, 07:18:49 PM
I'm not certain if it's stock or not it came with the car. 

anlauto

#6
January 29, 2019, 06:39:31 AM
Looks factory to me  :dunno:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

dodj

#7
January 31, 2019, 04:19:55 PM
Quote from: anlauto on January 29, 2019, 06:39:31 AM
Looks factory to me  :dunno:
My '73 bracket was the same height as the ECU. It's on Shadango's 'cuda now. (cc.c member)
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill
Print
Go Up Pages1
User actions

Similar Topics