1970 Challenger Hellcrate install?

[Paul A]

I have completed two restorations now on a 68 Fastback and a 71 Mach 1 Mustang and have come to the dark side and just bought my first Mopar project. It's a 1970 Challenger. I'm seriously considering going for it and installing the Hellcrate and Tremec in this car. Is there anyone who can give me some insight or advice concerning engine fitment/ modifications or any other considerations I should be aware of that will be needed, or any information for that matter? Thanks!

[Chryco Psycho]

Welcome @Paul A 
#)# mopar did a hemi swap & it is all detailed here
https://forum.e-bodies.org/modern-hemi-swaps/26/392-hemi-swap/67/
if you are going to install a Tremec I would look at the T56 Magnum or T5050 minimum which will require floor surgery .

[Brads70]

Welcome to the site!
on the T56 not the 5 speed tremec

[Cuda Cody]

Welcome to the site!!!      

[Swamp Donkey]

    Welcome to the site.   I'm just starting a 3rd gen hemi build now.  My build will kinda slow, and I will try to detail any of the stumbling blocks I hit along the way.  But it seems 303 mopar did a pretty thorough job. 

[dodgemania]

  to the site 

[GoodysGotaCuda]

I have done a Hemi swap with a T56 Tremec, the floor requires a bit of work, the engine should be pretty straight forward in an e-body.

[JS29]

  There is a lot of experience at this sight, Every one is willing to help!    

[nsmall]

https://forum.e-bodies.org/your-restoration-project-roseville-moparts/10/1971-cuda-hellcat-chiquita/5778/

Start reading this.