Can't find 8 3/4 axle seals/gaskets

[Mrbill426]

If you mean the axle shaft bearing, the set number is a (NAPA) BR7, includes the cup, cone, and retaining ring.

MrBill

Do you know the parts for the axle bearings for a 8.75?

Thanks Ken

[Convertcuda]

Yes sorry thats what I meant. Thanks!! Do you know the number in Timken?

Thanks Ken

[Mrbill426]

I think it is just #Set7
NAPA bearings are SKF

Yes sorry thats what I meant. Thanks!! Do you know the number in Timken?

Thanks Ken

[Convertcuda]

Thanks is there a special seal that goes into the retainer?

[Mrbill426]

The outer seal is NAPA 19000, National 8704S, or Mopar 2404216
The carrier to housing gasket is Felpro RDS6583

Thanks is there a special seal that goes into the retainer?

[Convertcuda]

I just want to make sure that I have the right seal. The one I'm referring is the one fits into the bearing retainer adjustment plate. I wanted to buy all Timken from Rock Auto. Thats why I was asking for the numbers. Thanks for the help.

Thanks Ken

[Mrbill426]

Yes.  I think all those seals are for is to keep the axle bearing grease in and dirt/water out.   The inner seals keep the gear lube from flowing out and getting into the brakes.  The bearings do not run in oil, they are lubed by packed grease.

If I am wrong, someone PLEASE step up and set me straight. 

I just want to make sure that I have the right seal. The one I'm referring is the one fits into the bearing retainer adjustment plate. I wanted to buy all Timken from Rock Auto. Thats why I was asking for the numbers. Thanks for the help.

Thanks Ken

[Shane Kelley]

Yes.  I think all those seals are for is to keep the axle bearing grease in and dirt/water out.   The inner seals keep the gear lube from flowing out and getting into the brakes.  The bearings do not run in oil, they are lubed by packed grease.

If I am wrong, someone PLEASE step up and set me straight. 

I just want to make sure that I have the right seal. The one I'm referring is the one fits into the bearing retainer adjustment plate. I wanted to buy all Timken from Rock Auto. Thats why I was asking for the numbers. Thanks for the help.

Thanks Ken

That is correct!

[1 Wild R/T]

Sounds to me like Mr Bill has spent quite a few years behind a blue & yellow counter....

[Mrbill426]

  

Sounds to me like Mr Bill has spent quite a few years behind a blue & yellow counter....

[mjb765]

or this

[Mrbill426]

 

or this