Four speed wiring harness

[70 Challenger Lover]

Does anyone know if there is a reproduction wiring harness made for the safety switch on the side of the transmission? I pulled it out of my car and noticed the inside of the plug at one of the spade terminals looked melted away? I suppose I could cut the plug off and solder on new aftermarket terminals but I was hoping to use the correct plug.

Any idea what would cause that? Don't want it to happen again of course.

[dodj]

I believe you can buy the whole original style plug and splice it in a few inches away from the tranny

[Chryco Psycho]

IT is the 2 prong plug for the reverse lights I believe not the safety switch wich is on the clutch pedal
I used to buy them about 5 at a a time from Evans wiring

[Chryco Psycho]

http://www.evanswiring.com/

[73440]

https://www.yearone.com/Product/challenger-cuda/hu260n

[70 Challenger Lover]

IT is the 2 prong plug for the reverse lights I believe not the safety switch wich is on the clutch pedal
I used to buy them about 5 at a a time from Evans wiring

Yes you are right. It's for the reverse lights.

[70 Challenger Lover]

Thanks guys...I think my problem in searching was I kept thinking safety switch rather than back up lights

[Chryco Psycho]

glad to help