Main Menu

A/C Wiring Harness

Started by erik70rt, July 31, 2017, 10:44:11 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

erik70rt

My R/T has had a few wiring modifications done over it's life, so I started replacing the harnesses.  I started with the engine harness and that went in easily.  next I want to do the A/C harness as I only have a few cut wires here and there on the car now.  Where does the A/C harness connect at the source?  Right to the engine harness?  Or directly to the main harness at the block? 
Contrary to the opinions of some, I am not dumber than I look.

manycj

The AC/Heater wires are plugged into the same connector as the Reverse Light/Neutral Safety switch wires to form a harness that plugs into the main harness block on the firewall.  Technically the AC/Heater & Reverse Light/Neutral Safety switch harness is one harness, but you have to buy them separated. The new AC/Heater harnesses do not come with the connector. For my 70 it was p/n: ME8123 at Classic Industries. You will need to confirm the correct harness for your application.

Chris


<I>If I can't fix it, I'll fix it so no onw can!"</I>

Cuda Cody

I think M&H also makes the harness.   :notsure: