Main Menu

Trans Pilot Bushing

Started by mjb765, July 19, 2017, 06:06:37 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

SteveG

Are there specs anywhere listing the hole size and depth so a guy can check the crank when installing a different engine or changing the crank?

mjb765

Quote from: SteveG on July 21, 2017, 05:42:04 PM
Are there specs anywhere listing the hole size and depth so a guy can check the crank when installing a different engine or changing the crank?

Good question......I know it's more than 1 1/2"

Chryco Psycho

I don't have specs handy but anyone with a crank out can measure it , It has to be 1.25- 1.5 " in depth 


mjb765

Quote from: Chryco Psycho on July 21, 2017, 07:12:19 PM
I don't have specs handy but anyone with a crank out can measure it , It has to be 1.25- 1.5 " in depth

A 4 speed crank isn't deeper than that?

RUNCHARGER

After a few interesting experiences, pilot hole depth is one thing I check with a caliper when I bolt the bellhousing on. I think nothing of zipcutting a shiver off the input shaft if necessary.
Sheldon