Main Menu

Borgeson box

Started by 1973Barracuda, August 17, 2018, 07:35:35 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

1973Barracuda

Looked online to see if a borgeson box will fit with a 6.1 and tti headers. Found nothing.

Emailed the m as well. No response.

Anyone know?

ledphoot

Not sure but perhaps Peter @ Bergman Autocraft will know.

His email is:
peter@autosportdesigns.com

Tell him Alan Crouch sent you ;)


303 Mopar

Quote from: 1973Barracuda on August 17, 2018, 07:35:35 PM
Looked online to see if a borgeson box will fit with a 6.1 and tti headers. Found nothing.

Emailed the m as well. No response.

Anyone know?

TTI site says their headers clearn the borgeson box for a gen III.


1973Barracuda

Thanks!

Seems I wasn't smart enough to go to the tti site.......

GoodysGotaCuda

Note that TTI has borgeson specific hemi swap headers. You can use the standard swap headers...but get the hammer out. DAMHIK
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs

1973Barracuda

Well, no Borgeson for me then. I was doing it because with shipping, it would have been about the same price as FF. FROM summit with a coupon.

GoodysGotaCuda

Quote from: 1973Barracuda on August 18, 2018, 09:06:41 AM
Well, no Borgeson for me then. I was doing it because with shipping, it would have been about the same price as FF. FROM summit with a coupon.

Have you bought the headers already?


Sent from my iPhone using Tapatalk
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs


1973Barracuda

Yep. TTIs.

Will verify the part number, but I am certain I did not specify if I was using a Bordeson box.

303 Mopar

Quote from: 1973Barracuda on August 19, 2018, 04:17:01 AM
Yep. TTIs.

Will verify the part number, but I am certain I did not specify if I was using a Bordeson box.

These are the ones that fit - http://www.ttiexhaust.com/MoparClassics-Headers/61WP-134/TTi61WP.htm

1973Barracuda

Yep, I have the headers that won't work with the Borgeson. Firm Feel it is.

303 Mopar

Quote from: 1973Barracuda on August 19, 2018, 04:40:20 PM
Yep, I have the headers that won't work with the Borgeson. Firm Feel it is.

Get the Stage III.  I have it on my Charger and it works great!


1973Barracuda

Read nothing but good stuff about the stage three. For the money, I figured I would go with a Borgeson for the fewer pounds. With shipping, it will be about the same price I think.