Steering column shaft

[Cuda Cody]

And you even have a little rubber gasket that goes over it?    That's pretty slick!   I like it! 

[RUNCHARGER]

I like those nylon shear pins, that works great!

[Cuda Cody]

@Burdar  I know you probably do not need this coupler stop pin measurement anymore, but since I came across it I thought I would add it to this thread in case anyone else needs it.

Does anyone have a loose coupler that they could measure?  How far down from the open end is the hole for that small pin?  The one I have is all assembled and I want to get the location exactly right.

[cataclysm80]

I know​ you probably do not need this coupler stop pin measurement anymore, but since I came across it I thought I would add it to this thread in case anyone else needs it.

I thought the exact same thing as soon as I saw that picture today.
I'm glad to see it posted here.
Thanks Cody!

[Burdar]

 

[1 Wild R/T]

Good thread, more than one way to skin a cat....  My method for getting the cover to stay on the coupler is nothing like the posted methods, I get the tabs all bent before installing the cover &  if you do it just right it will snap on & it's very hard to get it back off.....