Main Menu
B

Idler arm bolt

Started by B5fourspeed, February 23, 2020, 11:54:29 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

B5fourspeed

February 23, 2020, 11:54:29 AM
On a 70 Cuda does the idler arm bolt go up from the bottom or from the top down.I have seen pictures of both.

GoodysGotaCuda

#1
February 23, 2020, 04:43:07 PM
I'm not sure if it's correct, but I put the bolt in from the top. If for some reason I lose the nut, I don't want that bolt to fall out...
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs

dodj

#2
February 23, 2020, 05:33:49 PM
In from the top according to my '73 service manual.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

JS29

#3
February 24, 2020, 05:43:48 AM
Quote from: GoodysGotaCuda on February 23, 2020, 04:43:07 PM
I'm not sure if it's correct, but I put the bolt in from the top. If for some reason I lose the nut, I don't want that bolt to fall out...
:iagree: No one can cheat the law of gravity!

anlauto

#4
February 24, 2020, 10:00:09 AM
Unfortunately Ma-Mopar missed the gravity class.....
The nut is on the top with a cotter pin in 1970-71.... :dunno:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

anlauto

#5
February 24, 2020, 10:24:39 AM
....and of course...this is from the 1974 Parts Manual  :looney: ... I don't have a 73 service manual...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Cuda Cody

#6
February 24, 2020, 11:30:10 AM
 :drunk:  :haha:  Guess you get to pick whatever way you want to install it.  I put it facing down the nut on bottom, but I'm sure both ways will be fine.

Shane Kelley

#7
February 24, 2020, 12:06:07 PM
Unrestored low mileage RJ Reynolds 71 Hemi Cuda has it for the top down. I love this car for reference materiel. I grabbed every picture they had from the listing.

B5fourspeed

#8
February 24, 2020, 12:07:51 PM
Cody, I tightened the bolt to 60 pounds.How hard or easy should the Idler arm move.

Shane Kelley

#9
February 24, 2020, 12:10:28 PM
Should move freely. Most times there is a thin washer (shim) that goes between the idler and the K member ear. If you don't use it sometimes it with bind and cause the idler to be stiff.  :alan2cents:

RUNCHARGER

#10
February 24, 2020, 12:32:44 PM
Yup: Firm, not stiff and please drop the bolt in. Gravity contributes to logic.
Sheldon
Print
Go Up Pages1
User actions
Tags:

Similar Topics