70 Challenger SE

[Timbbuc2]

Coming along.  And I got AC vents out of the parts lot I bought

[Cuda Cody]

Looking good!   

[Timbbuc2]

Well I have been busy on the dash, almost done. I will say this to anyone getting ready to do a wire harness. When you remove the old one, just disconnect the wire ends from what ever it goes to. When I bought my dash wire harness, I thought good this will be simple, Well,HELLO, that is just the start. There are so many different wire harnesses you have to buy to make it complete. Silly me. I know most of you  guys already know this but as I mentioned to @anlauto this is my first rodeo.
As suggested by @cudacody I found a local guy to rebuild my 3 speakers, not a bad price either.  I had a key made for my glove box, guy came to my work and brought it back 85 bucks and he left the lock out so I could have it painted. Does the glove box key fit the console?
And the saga continues!!!!

[Cuda Cody]

Every little bit helps.  You're getting closer all the time.   

[Chryco Psycho]

Looking great as you work through the process 

[wldgtx]

Where is the "subscribe" button.... looking, looking, looking. 

I have picked up so many things on this thread it's ridiculous.  Great job guys!

[Timbbuc2]

Where is the "subscribe" button.... looking, looking, looking. 

I have picked up so many things on this thread it's ridiculous.  Great job guys!

You and me both, these guys and gals are a big help.

[Timbbuc2]

Is there a separate harness for the low fuel relay?
Second picture ! What is it. Not sure if it is for my car but came with it.

[Cuda Cody]

Yes, I think there is a hardness for SE cars for that relay. (date stamp on your part is 2549 = 254th day of 1969)

The second photo is a Factory Radio Cross Over (2759 = 275th day of 1969)

[autoxcuda]

Is this the separate harness that plugs into that low fuel relay ?

Or is this just the overhead consolette??

I have the dash with harness for same S/E car too.

[1 Wild R/T]

Is this the separate harness that plugs into that low fuel relay ?

Or is this just the overhead consolette??

I have the dash with harness for same S/E car too.

The low fuel relay harness is part of the O/H console harness....  The blue power wire from the IVR gets unplugged from the fuel gauge & instead the blue wire from the low fuel relay gets plugged into the terminal...

[Timbbuc2]

Wiring the dash almost complete.  Can anyone tell where this tan wire goes ?

[Cuda Cody]

Is it a 1970 Wiring harness?  I thought double tan was an accessory lead, but it has a different plugs on the end?

https://forum.e-bodies.org/electrical-and-audio/11/colored-wiring-diagrams-70-cudachallenger/1349/

[Timbbuc2]

Yes it is a 70, my original  has the same

[Timbbuc2]

Wiring the dash almost complete.  Can anyone tell where this tan wire goes ?

@anlauto you have any idea where or what this wire is.
On another note I bought a set of fender badges and the nuts came with it. But they really look to small. The pins are tapered like it uses a plastic insert. Y1 said it uses the nuts, 1/8 self threading, I might work but I sure would hate to break off a pin. What are others using,