A.G.A.R. This just in....THE END !

[CNUMB]

Looks like a great project.. Nice progress so far.. I will be watching this, hoping to learn a little..

[dodj]

What is with the hole in the trunk floor?

In tank fuel pump? 


Did you weld up the upper shock mount hole? 

[anlauto]

Did you weld up the upper shock mount hole? 

Yup, it's not used with the RMS Altercation front suspension.

[dodj]

Yup, it's not used with the RMS Altercation front suspension.

Ah, Ok.

[anlauto]

Also welded up the battery tray mounting holes, because the battery will go in the trunk to make room for the air cleaner set-up..

[Spikedog08]

Looks like a great project.  Good to see a build thread from you again!   

[anlauto]

So, end of week two....still waiting to get the car media blasted, Christmas Season, isn't the best to get things done
So while the car is still here I thought I would pick away at more welding....

[blown motor]

Alan, that's cool that you're doing more of the work yourself. Don't you have a problem with the smoke/smell getting into the rest of the house?

[anlauto]

Alan, that's cool that you're doing more of the work yourself. Doesn't your wife have a problem with the smoke/smell getting into the rest of the house?

Fix it for you...

[blown motor]

 

[YellowThumper]

This build is screaming to be FC7. 

[anlauto]

This build is screaming to be FC7. 

I hope you're kidding....if I build one more purple car my head will explode    

I think ten is enough http://www.alangallantautomotiverestoration.com/PAST-RESTORATIONS.html 

[Swamp Donkey]

The only thing I'm curious about you welding up is the holes for the heater.  I'm also wanting to do the vintage air A/C in my car.  I just assumed that would use the existing holes.  I will follow along and see how it's done!


Sent from my iPhone using Tapatalk

[YellowThumper]

This build is screaming to be FC7. 

I hope you're kidding....if I build one more purple car my head will explode    

I think ten is enough http://www.alangallantautomotiverestoration.com/PAST-RESTORATIONS.html 

Yes a joke.

[YellowThumper]

The only thing I'm curious about you welding up is the holes for the heater.  I'm also wanting to do the vintage air A/C in my car.  I just assumed that would use the existing holes.  I will follow along and see how it's done!


Sent from my iPhone using Tapatalk

FYI they sell bulkhead connectors in a straight line.  These will fit thru the firewall off to passenger side that let out into the inner fenderwell.
This is how my eventual setup will be.