Main Menu

Back glass reveal molding attachment

Started by Mrbill426, June 10, 2022, 08:36:48 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Mrbill426

Prepping for a guy to come install the back glass I see (yeah just now) that although the reveal molding clips are held in by little nail head type pins on the sides and top, across the bottom along the (replaced) filler panel there is nothing.  :huh:  Are there supposed to be pins there too but the panel manufacture omitted them, or are the clips held by screws there?
What ever it is supposed to be can someone please tell me how many clips and what their spacing is?  Thanks


anlauto

They would have been pins from the factory, but you can use screws no big deal. Placement not 100% important either...
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Mrbill426

@anlauto thanks.   I'll just use what ever number of clips are left over after the "pins" are full and distribute those evenly across the bottom.


Quote from: anlauto on June 10, 2022, 08:43:43 AM
They would have been pins from the factory, but you can use screws no big deal. Placement not 100% important either...