Main Menu

Rotating rear bumper

Started by Rdchallenger, February 17, 2022, 11:21:18 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Rdchallenger

February 17, 2022, 11:21:18 AM
So I got 70-72 bumper brackets and a new rear bumper for my challenger. It looks good other than it looks like it needs rotated for the top in. How would I go about doing that?

dodj

#1
February 17, 2022, 12:18:49 PM
Might be the angles involved, but it looks good on the pass side and not as good on the drivers side..which makes me think...twisted a touch?
I would try shimming the bottom side of the driver's side bumper bracket.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

Rdchallenger

#2
February 17, 2022, 12:35:11 PM
Quote from: dodj on February 17, 2022, 12:18:49 PM
Might be the angles involved, but it looks good on the pass side and not as good on the drivers side..which makes me think...twisted a touch?
I would try shimming the bottom side of the driver's side bumper bracket.

Where it connects to the cross member or where it connects to the bumper?

dodj

#3
February 17, 2022, 12:58:18 PM
I was thinking between the bumper and bracket. To tilt the top in.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

Rdchallenger

#4
February 17, 2022, 01:03:01 PM
Quote from: dodj on February 17, 2022, 12:58:18 PM
I was thinking between the bumper and bracket. To tilt the top in.

Copy that! Will give it a try

Rdchallenger

#5
February 17, 2022, 02:16:57 PM
I can live with that. Thanks for the advice @dodj  :slapme5:
Print
Go Up Pages1
User actions

Similar Topics