26 inch radiator

[Marc70challenger]

Bought a 26' 4-row Champion awhile back and it runs ice cold.

I guess if I sat on a big meaty burnout for about 1/2 hour it might start getting warm.

  always had good luck with Champion.

[Husk Challenger]

Hey guys,

About Champion radiators, how do you chose the hose reference?
I would like to change my superior hose for something looking original and not flexible, but i am a bit lost with the rockauto list....

Thanks.

[JS29]

Some where I have A radiator hose for A 26 inch rad, ordered wrong from year one. if interested let me know.       Mark.

[Husk Challenger]

Thanks for the offer Mark but i have an order at rockauto and i would prefer combien shippment... otherwise the shipping cost to Europe will kill thr deal. 

[1 Wild R/T]

Hey guys,

About Champion radiators, how do you chose the hose reference?
I would like to change my superior hose for something looking original and not flexible, but i am a bit lost with the rockauto list....

Thanks.

Order the 20630

[Husk Challenger]

Thanks a lot @1 Wild R/T

[1 Wild R/T]

No problem, happy to help..

[HP_Cuda]

Hey guys,

About Champion radiators, how do you chose the hose reference?
I would like to change my superior hose for something looking original and not flexible, but i am a bit lost with the rockauto list....

Thanks.

Order the 20630


its what I used

[realn96]

I think I am finally going to replace my 22 inch rad with a 26. I have the support piece adapter but don't want to tear into it that far. Thought I would cut and weld just the flange part on the pass side to widen the opening. What have you guys done to install a larger rad? Also did the drivers side mounting get moved? I am not dealing with an original car here so open to any mods. Thanks.

Too bad your so far away from me. I have a 26"radiator from Roseville "Dave" that I don't think i'll  be using. .never even opened the box!

[mopar jack]

Shipping would hurt. I'll eventually order local and try to save on shipping.
I ended up getting my 22 inch rad tanked/cleaned and flow checked. I'ts good to go for another year. That should give me time to cr.p or get off the pot and finally upgrade to a larger system. Thanks.

[Guscuda]

I put a 26" us radiator in mine about 5 yrs ago, looks stock and does a good job

[mopar jack]

Guscuda how many rows did the core have and did it have brackets to mount a shroud? Thanks.

[B5fourspeed]

When you a replacement radiator make sure it says Oem replacement.That means it will bolt up exactly like an original radiator and the shroud will bolt to the radiator correctly.I have done 2 of the 26 inch radiator conversion kits.

[Guscuda]

My 26 inch us radiator is a three core, and if I remember correctly it did not come with any mounts. I just used my existing mounts, it did require a little "coaxing" though.

[Shoooter]

I believe you can make a c body one fit with alittle bit of work if you have one kicking around