Torque converter

[Timbbuc2]

As most of you know I bought my car with a bunch of new parts to go with it still in the box, Today hooking the AT to the engine and started to bolt to the flex plate but the holes would not line up, so I did some checking and it is a Pro-King CR-22 for a 73 340. I am trying to find a correct torque converter for a 70 383/727 AT, not something to "Come off the Line" I want it back stock, All I can find so far is performance converters. @Cuda Cody anyone know where I can get one. BTY I have a new Torque converter for a 73 340 to sell for a bargin.

[Cuda Cody]

I've used these guys:

http://www.dynamicconverters.com/converters.htm

Tell them the type of engine you have and they will build you the perfect converter.  From stock to race they pretty much can do it all.  I thought I had the specs on the stall speeds for the 1970 383+4, but can't seem to find them now.  I'm sure they will know.

[Timbbuc2]

Great, Thank you @Cuda Cody

[chal340]

This was for 68 engine, not too far for 70 I presume.

[Timbbuc2]

I've used these guys:

http://www.dynamicconverters.com/converters.htm

Tell them the type of engine you have and they will build you the perfect converter.  From stock to race they pretty much can do it all.  I thought I had the specs on the stall speeds for the 1970 383+4, but can't seem to find them now.  I'm sure they will know.

Just called and ordered, Thanks @Cuda Cody and good price.

[Timbbuc2]

I've used these guys:

http://www.dynamicconverters.com/converters.htm

Tell them the type of engine you have and they will build you the perfect converter.  From stock to race they pretty much can do it all.  I thought I had the specs on the stall speeds for the 1970 383+4, but can't seem to find them now.  I'm sure they will know.

Should get my torque converter Friday, thanks for the tip @Cuda Cody