74 Challenger Canadian Restoration

[daaboots]

Here's the video of us pulling it from the old Dodge Truck.

[daaboots]

I finally start to work on the panel gaps. I have the doors and trunk finished up. Next up is the front grill. So far so good!

[daaboots]

Panel gap video, part 1 

[daaboots]

Panel gap video part 2. I also relocated the front bumper in order to remove the ugly plastic gap filler. Hope you enjoy 

[Brads70]

Is this what your looking for?


https://www.rosevillemoparts.com/product/bumper-end-filler-seals-1970-71-dodge-challenger/

https://www.rosevillemoparts.com/product/bumper-end-filler-seals-71-72-challenger/

[daaboots]

Next video is up! With the help from Mike at OntarioProBlast, we cleaned the rust up on all the old original metal. Then it was a coat of rust encapsulator, metal prep, and finally some primer!

[jimynick]

It IS looking good, but check with your thumb nail and a small scraper how the adhesion is before you hammer another coat on. I used the same primer and had adhesion issues that req'd stripping the car -again. It might have been my method or the material and I'm not trying to jinx you. Just see how it's holding before you spend more money. 

[daaboots]

It IS looking good, but check with your thumb nail and a small scraper how the adhesion is before you hammer another coat on. I used the same primer and had adhesion issues that req'd stripping the car -again. It might have been my method or the material and I'm not trying to jinx you. Just see how it's holding before you spend more money. 

J @jimynick

I have really good adhesion. Maybe you just had a bad batch? 

Also, I sent you a DM. I'm finished with the rotisserie and I was wondering if you stall want it back.

[Lunchbox]

It's been great reading/watching your progress over the last 6 years!

[cudamadd]

Wow man have you done some work. What a project well done coming together thanks for posting Aussie

[jimynick]

David, I've been in France and my phone didn't work, so sorry for the slow response. I did make a reply, in which I said that the rig was given to me and I gave it to you, and you've used it to great effect, so why don't you give it to someone who could benefit as much from it's use as we did? If that's a problem let me know and we could open it to folks from here. The only thing that I'd like to see, is that it goes to someone who will actually need and use it (just like you) rather than just go to someone who'll just hoard it or scrap it. Your car looks great and I look forward to seeing it progress into paint and final assembly! Ian