392 Hemi Swap

[Chryco Psycho]

Obviously a better design than the Mopar truck pedal supplied

[JpRngr]

I'm doing a 6.1 swap, so maybe an older design.

[Chryco Psycho]

Hotwire is obviously supplying a different / better pedal with their kit

[303 Mopar]

Interesting. The one I got from HotWire with my harness angles fine.

I think @Chryco Psycho is correct, and looking at the hotwire kit it says its a 2006 Jeep Grand Cherokee gas pedal.  Do you have a pic?

[JpRngr]

I will take a pic when I get it back in. I pulled it back out to make a spacer to give the pedal full travel and account for carpeting.

[Chryco Psycho]

Take a picture of it while it is out too please !

[IMNCARN82]

  I also want/need to do this swap.   Thanx for the write-up and pix !!!!   inspires me     (makes me think i can do it!) ha!     I'm getting ready to order the engine,Harness.   Did you go to dave at Roseville ?     

R/T

[Chryco Psycho]

If you need help call
Yes the engine & wiring was all through Dave / Roseville @MoparDave

[303 Mopar]

  I also want/need to do this swap.   Thanx for the write-up and pix !!!!   inspires me     (makes me think i can do it!) ha!     I'm getting ready to order the engine,Harness.   Did you go to dave at Roseville ?     

R/T

I ordered most everything through Dave, just make note in the write of the things not to order.  There were a couple of specific things I had to get a On Track Performance Speed shop here in town, and I had Napa make the hose/connections for the power steering pump to the remote reservoir.  The good news is you have a great example of one completed within 45 min of you. Come on over some time and we can go over everything.  I have no doubt with your level of skills you can easily do this.  And I would love to help you and your beautiful car.  Any questions let me know.

[ec_co]

  I also want/need to do this swap.   Thanx for the write-up and pix !!!!   inspires me     (makes me think i can do it!) ha!     I'm getting ready to order the engine,Harness.   Did you go to dave at Roseville ?     

R/T

as Dan said he has the perfect example for you to look at close by and @CudaKat has a shop in Aurora where they both did the install. Before you jump on the 392 swap though ..... for just a few grand more you could go full Hellcat motor ...... 

[Chryco Psycho]

If for any reason you want my help I am willing to fly up too

[303 Mopar]

If for any reason you want my help I am willing to fly up too

Should be less than 10 days this time....

[ec_co]

If for any reason you want my help I am willing to fly up too

Should be less than 10 days this time....

I'm always willing to lend a hand as well

[HP_Cuda]

For a couple grand more it seems like a no brainier but then you prob have to pay for the blower eh?

Saw the other thread, not bad ~27k all in

[Chryco Psycho]

If for any reason you want my help I am willing to fly up too

Should be less than 10 days this time....

That would depend on how many we could line up to do in one go !!