Main Menu

392 Hemi Swap

Started by 303 Mopar, January 01, 2017, 10:01:31 AM

Previous topic Next topic

0 Members and 5 Guests are viewing this topic.

Chryco Psycho

Obviously a better design than the Mopar truck pedal supplied

JpRngr

I'm doing a 6.1 swap, so maybe an older design.

Chryco Psycho

Hotwire is obviously supplying a different / better pedal with their kit


303 Mopar

Quote from: JpRngr on October 08, 2017, 11:08:01 PM
Interesting. The one I got from HotWire with my harness angles fine.

I think @Chryco Psycho is correct, and looking at the hotwire kit it says its a 2006 Jeep Grand Cherokee gas pedal.  Do you have a pic?

JpRngr

I will take a pic when I get it back in. I pulled it back out to make a spacer to give the pedal full travel and account for carpeting.

Chryco Psycho

Take a picture of it while it is out too please !

IMNCARN82

  I also want/need to do this swap.   Thanx for the write-up and pix !!!!   inspires me     (makes me think i can do it!) ha!     I'm getting ready to order the engine,Harness.   Did you go to dave at Roseville ?     

R/T
round tail lights forever !!


Chryco Psycho

If you need help call
Yes the engine & wiring was all through Dave / Roseville @MoparDave

303 Mopar

Quote from: IMNCARN82 on October 26, 2017, 04:06:40 PM
  I also want/need to do this swap.   Thanx for the write-up and pix !!!!   inspires me     (makes me think i can do it!) ha!     I'm getting ready to order the engine,Harness.   Did you go to dave at Roseville ?     

R/T

I ordered most everything through Dave, just make note in the write of the things not to order.  There were a couple of specific things I had to get a On Track Performance Speed shop here in town, and I had Napa make the hose/connections for the power steering pump to the remote reservoir.  The good news is you have a great example of one completed within 45 min of you. Come on over some time and we can go over everything.  I have no doubt with your level of skills you can easily do this.  And I would love to help you and your beautiful car.  Any questions let me know.

ec_co

Quote from: IMNCARN82 on October 26, 2017, 04:06:40 PM
  I also want/need to do this swap.   Thanx for the write-up and pix !!!!   inspires me     (makes me think i can do it!) ha!     I'm getting ready to order the engine,Harness.   Did you go to dave at Roseville ?     

R/T

as Dan said he has the perfect example for you to look at close by and @CudaKat has a shop in Aurora where they both did the install. Before you jump on the 392 swap though ..... for just a few grand more you could go full Hellcat motor ......  :stayinlane:
Growing older is mandatory...growing up is optional.

Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came

Chryco Psycho

If for any reason you want my help I am willing to fly up too


303 Mopar

Quote from: Chryco Psycho on October 30, 2017, 07:59:08 AM
If for any reason you want my help I am willing to fly up too

Should be less than 10 days this time.... :cheers:

ec_co

Quote from: 303 Mopar on October 30, 2017, 08:08:15 AM
Quote from: Chryco Psycho on October 30, 2017, 07:59:08 AM
If for any reason you want my help I am willing to fly up too

Should be less than 10 days this time.... :cheers:

I'm always willing to lend a hand as well :)
Growing older is mandatory...growing up is optional.

Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came

HP_Cuda

For a couple grand more it seems like a no brainier but then you prob have to pay for the blower eh?

Saw the other thread, not bad ~27k all in
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200

Chryco Psycho

Quote from: 303 Mopar on October 30, 2017, 08:08:15 AM
Quote from: Chryco Psycho on October 30, 2017, 07:59:08 AM
If for any reason you want my help I am willing to fly up too

Should be less than 10 days this time.... :cheers:

That would depend on how many we could line up to do in one go !!